SUNTEX Ozone Transmitter

SUNTEX Ozone TransmitterCT-6310RSProvided by Qingdao Shangzhong Electronic Technology Co., Ltd

The SUNTEX ozone controller CT-6310RS is widely used for water quality monitoring in tap water, circulating water monitoring, swimming pools, pure water, drinking water, terminal water, and hospital wastewater discharge fields.

Online ozone analyzer CT-6310RSFeature:
1.144 × 144mm large-sized residual chlorine ozone transmitter
2. Simplified and Traditional Chinese English Operating Interface
3. Outdoor waterproof design, suitable for wall installation, panel installation, and circular pipe installation.
4. LCM display with inductive backlight setting function
5. Equipped with automatic cleaning contacts and programmable output settings
6. Zero and range calibration, as well as sample correction mode
7. Password lock and combination key enter setting mode, calibration mode, and increase security protection
8. Isolated 0/4-20mA output
9. RS485 isolated interface output, standard Modbus communication output, providing measurement values, sample adjustments, event recording, control parameters, etc
10. There are 50 sets of event recording functions, which record information such as alarms, power outages, and corrections

Technical Specifications:

Measurement range: Residual chlorine: 0.000-100.0 ppm (mg/L) depending on the electrode
Ozone: 0.00~20.00ppm (mg/L) depending on the electrode
Temperature: -30.0~130.0 ℃

Resolution:
余氯0.001 mg/L，0.01mg/L，0.1mg/L
Ozone 0.01mg/L
Temperature 0.1 ℃

Accuracy:
Residual chlorine ± 0.5% (± 1 Digit)
Ozone ± 0.5% (± 1 Digit)
Temperature ± 0.2 ℃ (± 1 Digit), with temperature error correction function

PH compensation: manual pH correction compensation

Measurement units: mg/L and ppm are optional

Working temperature: 0-50 ℃

Storage temperature: -20~70 ℃

Protection level IP65

Analog output: One isolated 0/4-20mA output, programmable to correspond to individual unit range values

Digital output: RS485 output, standard Modbus communication protocol

Relay output: Any program setting after high and low points, two sets of high and low point ON/OFF outputs, 240VAC, current 0.5A

Cleaning contacts: One set of contact outputs, ON 0-99 minutes and 59 seconds, OFF 0-999 hours and 59 minutes

Power supply: 100V~240VAC, 50/60HZ wide power supply

Installation methods: wall installation, panel installation, circular pipe installation

Instrument size: 144 × 144 × 115mm

Hole size: 138 × 138mm

Weight: 0.8kg

SUNTEX Ozone TransmitterCT-6310RS is professionally supplied by Qingdao Shangzhong Electronic Technology Co., Ltd