Sales price of Tianjin 10KN new standard cement mortar flexural testing machine

Sales price of Tianjin 10KN new standard cement mortar flexural testing machineThe YDW-10 new standard cement mortar flexural testing machine, produced and developed by Tianjin Yaxing Automation Experimental Instrument Factory, is designed and manufactured according to the requirements of GB177-85 "Method for Testing the Strength of Cement Mortar", ISO GB/T17671-1999 "Method for Testing the Strength of Cement Mortar", and T0503-94 "Test Code for Cement Concrete in Highway Engineering". The new standard cement mortar flexural testing machine uses a stepper motor as the power source to drive precision ball screws for loading, and adopts an EPC-70 embedded color screen controller for fully automatic control of the machine. It has the characteristics of simple structure, low noise, energy saving and environmental protection, and simple operation, and is suitable for testing the flexural strength of cement mortar 40 × 40 × 160mm prisms and red bricks, refractory bricks and other materials.

Sales price of Tianjin 10KN new standard cement mortar flexural testing machineThe 10kn new standard cement mortar flexural strength testing machine is mainly used for testing the flexural strength of materials such as cement, red bricks, refractory bricks, etc. It can automatically load according to the loading speed specified in the corresponding national standards. During the loading process, it can dynamically display the load, speed, time, and test curve in real time. This testing instrument also has a test force holding function. After the test is completed, it can automatically save the test results, which can be queried and printed.

Main technical parameters of YDW-10 new standard cement mortar flexural testing machine

The maximum test force is 10KN

Display mode: Large LCD screen
Test force resolution 1/200000
Relative error of indication ranging from 1% to 100%

Within the range of ± 1%
Test force indication repeatability relative error ≤ 1%
Loading speed range 5-500N/s
Experimental space (height x width) 180x165mm
Zui large stroke 40mm
Loading method electric
Power supply voltage (must have reliable grounding measures)~220V ± 10% 50Hz
Power 80W

Functional characteristics of 10kn new standard cement mortar flexural testing machine

1. The controller of this new standard cement mortar flexural testing machine adopts the control software under Microsoft WINCE operating system, which is powerful in function and easy to operate;
2. This new standard cement mortar flexural testing machine supports membrane button operation, as well as external standard keyboard and mouse operation;
3. This new standard 10KN cement mortar anti bending machine supports printing test reports with micro printers or HP inkjet printers, both of which are optional;
4. The up and down arrow keys can be used to adjust the fast/slow lifting and lowering of the pressure head, with flexible operation and easy switching;
5. This cement mortar flexural testing machine has the function of returning to the initial position after the test is completed, which is intelligent, efficient, and fast;
6. The 10KN new standard cement mortar flexural testing machine has the highest and lowest limit protection function for the largest working position, as well as overload and overcurrent protection functions, which is reliable and safe;
7. The new standard cement mortar flexural testing machine can achieve control functions such as constant rate loading, load holding, and constant rate unloading, and has the characteristics of smooth loading and high control accuracy;
8. The new standard cement mortar flexural testing machine has an Ethernet communication interface, which can be connected to a computer for online communication and control, or conveniently networked through Ethernet.

Installation of 10KN new standard cement mortar flexural testing machine

1. This cement mortar flexural testing machine uses a 220V working power supply. When connecting the power, attention should be paid to the yellow green wire as the ground wire. Do not connect it incorrectly to avoid electric shock.

2. The new standard for cement mortar anti bending machine should be placed on a stable workbench, which must be firm, preferably a marble workbench. The front and rear width should not be less than 80cm, the left and right length should not be less than 100cm, and the height of the workbench should be between 80-100cm for easy operation.

3. The laboratory should be kept away from vibration sources, especially when conducting tests. Vibration must be avoided to avoid affecting the objectivity of the results of the cement mortar flexural testing machine.

The use of 10KN new standard cement mortar flexural testing machine

1. Before use, turn on the power supply of the control instrument of the new standard cement mortar flexural testing machine and preheat for 10 minutes to improve the accuracy of the test results.

2. Place the anti bending fixture, take out the cured cement mortar test block, gently place the test block on the anti bending fixture, open the control program, start evenly loading, and when the test block is broken, the 10KN anti bending machine will automatically stop loading.

3. Clean up the broken test block and debris, place the second test block until the group test is completed, store and print the data, clean the site, wipe and cover the new standard cement mortar flexural testing machine.

10KN new standard cement mortar flexural testing machine after-sales service:
The main unit of the cement mortar flexural testing machine is guaranteed for one year and provided with lifelong maintenance service by Tianjin Yaxing Automation Experimental Instrument Factory under normal use. The host is damaged due to non-human factors, and free repair and replacement of parts are provided.
2. Training:
a、 Within two days of the arrival of this testing machine at the buyer's site, our personnel will be present to debug it and provide free training for 2-4 operators at the buyer's company.
b、 The training must reach the level of being able to correctly use the testing machine, operate software, and perform general maintenance and troubleshooting.
3. Repair service:
a、 Consulting service: The supplier shall provide answers to any questions regarding the use of the product at any time or in writing.
b、 During the warranty period, the supplier shall provide the user with a troubleshooting solution within 4 hours and notify the user if the issue cannot be resolved.

c、 During the warranty period, only repair costs will be charged for faults or damages caused by human or natural disasters.
d、 If you need to replace equipment or other components or send them for repair, please ensure that it is resolved within seven working days.
4. The following situations are not covered by the warranty: (However, we still guarantee to meet the urgent needs of our customers, actively cooperate, promptly troubleshoot, and only charge for repair costs.)
a、 Malfunctions or damages caused by abnormal operations and human or natural disasters.
b、 All malfunctions caused by untrained professionals operating.
c、 Damage caused by disassembling and modifying any part (such as microcomputer, host, circuit, etc.) without our consent.
d、 Installing toxic software without our consent, deleting computer files or removing registration numbers without authorization, causing the testing machine to malfunction