Sand and dust prevention test chamber

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sand and dust prevention test chamber is manufactured strictly in accordance with the technical specifications of environmental testing equipment, simulating the adaptability test of products to sand and dust climate environment. It is a device that can simulate the destructive testing of fine sand or dust in real environments on industrial machinery or products in advance, and is also designed to prevent related machinery or products from causing batch damage and significant economic losses in practical applications.

Product Details

Sand and dust prevention test chamberStrictly follow the technical specifications of environmental testing equipment for precision manufacturing, simulate the adaptability test of products to sand and dust climate environment. It is a device that can simulate the destructive testing of fine sand or dust in real environments on industrial machinery or products in advance, and is also designed to prevent related machinery or products from causing batch damage and significant economic losses in practical applications.

Sand and dust prevention test chamberSpecification parameters:

Model number		LQ-IP-500	LQ-IP-800	LQ-IP-1000	LQ-IP-1500	LQ-IP-2000
Inner box size (mm)	deep	800	800	1000	1000	1200
	wide	800	1000	1000	1500	1800
	high	800	1000	1000	1000	1200
Outer box size (mm)	deep	1200	1200	1300	1300	1500
	wide	1200	1300	1300	2000	2300
	high	1800	2000	2000	2000	2300
Dust dehumidification		Electric heating dehumidification
Vibrator		Set the vibration time and interval time by the Korean ternary controller to allow the dust adhering to the wall to shake off and maintain the required concentration value for the experiment.
Metal mesh nominal wire diameter μ m		50
The nominal spacing between lines is μ m		75
sample		Dry stone powder and fly ash
dust concentration		2～4kg/m3
Outer box material of the box body		Cold rolled plate spray coating/SUS304 hairline stainless steel plate
Box material inside the box		SUS304 stainless steel plate, can prevent dust and rust for a long time
observation window		Equipped with rain and dust removal device
Lead hole		Default size ￠ 50mm, 1 piece. If multiple pieces are needed or no order is required, please specify
controller		TEMI880 Programmable Controller from South Korea
Main Configuration		Circulating fan, vibrator, heater, vacuum pump, etc
protective device		Leakage and phase loss
Power supply (V)		380
Total power (KW)		2	2.5	3	4	5
meet the standard		GB4208、GB2423、IEC60529、GJB150、DIN40050、GB7000.1-2007 (IEC60598-1-2006)

Safety protection device:

1. The sand and dust box is equipped with an ultra-high temperature protection device to prevent uncontrolled temperature control from affecting the test and causing danger.

2. The default is a single box 220V power supply. If three-phase power is installed, it has three-phase voltage under phase and phase sequence protection to prevent the dust blower from working in reverse.

3. Install a time accumulator to prevent accidental interruption of the test, without knowing the interruption point time, and also to know the time limit when the sand and dust have worked at any time.