Sand and stone ore slurry pump

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sand and gravel ore slurry pump can mix the settled mortar, ore, ore, slurry, etc. into a slurry and pump them simultaneously through strong mixing with the slurry pump accessory mixing head. Provides a convenient method for sediment cleaning.

Product Details

The sand and gravel slurry pump can mix the precipitated mortar, mineral sand, ore, slurry, etc. into a slurry through strong mixing with a mixing head, and pump them simultaneously. Provides a convenient method for sediment cleaning.

　　1、 General application:

1. Tailings, slag, and slurry transportation in the beneficiation plant.

2. Coal mine slag, coal slurry, and coal slurry removal.

3. Power plant fly ash, coal slurry, and coal slurry transportation.

4. Absorb various solid particles of diamond sand, quartz sand, and steel slag.

5. Mineral processing, gold mining, and iron sand extraction.

The sand and gravel ore slurry pump adopts a new submersible mixing and tailings pumping technology, which uses powerful mixing impellers to mix the settled tailings particles into slurry, and then pumps it to the required place with a submersible sand discharge pump.

Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy, leaving the outer edge of the impeller at high speed and entering the volute pump casing. In the snail shaped pump casing, the liquid slows down due to the gradual expansion of the flow channel, and converts some of its kinetic energy into static pressure energy. Finally, it flows into the discharge pipeline at a higher pressure and is sent to the required location. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed at the center of the impeller. Due to the pressure above the liquid level in the storage tank being greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller.

　　2、 Main performance:

1. The overall equipment is simple, without the need for auxiliary mixing or spraying devices, easy to operate, and reduces the total investment of the unit.

2. The flow components such as impellers and stirring impellers are made of high hardness and high chromium cast steel, which is wear-resistant, corrosion-resistant, and has strong sand removal ability.

3. The flow channel is wide and smooth, with good anti clogging performance, and can pass through larger solid slag slurry and slag particles.

4. The sealing of the pump adopts a hard alloy mechanical seal, which can effectively prevent high-pressure water and impurities from entering the motor cavity.

5. The motor submerges underwater without being limited by suction, with a high slag absorption rate and faster dredging.

渣浆泵