-
E-mail
2355834892@qq.com
-
Phone
1800-2922-997,1800-2922-993
-
Address
No. 13 Lichang Road, Songmushan Village, Dalang Town, Dongguan City, Guangdong Province
Product Categories
Dongguan Tailing Electromechanical Co., Ltd
Shell rotating magnetic powder brake TL-POD-A type
NegotiableUpdate on 05/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The TL-POD-A type magnetic powder brake with a rotating outer shell adopts a natural cooling method, with a hollow shaft connection and stopper support. The outer shell rotates and the outer periphery rotates to improve heat dissipation performance and increase heat capacity. It is available for use from 5 r/min
Product Details
Tai LingShell rotating magnetic powder brakeThe TL-POD-A heat dissipation method is a natural cooling type, with hollow shaft connection, stop support, and rotating outer shell to improve heat dissipation performance and increase heat capacity. It is available for use from 5 r/min. The main torques include 6, 12, 25, 50, 100, 200, 400nm, etc. The shell rotating magnetic powder brake is widely used in slitting machines, coating machines, papermaking machinery, chemical machinery, plastic machinery, printing machinery, textile machinery, printing and dyeing machinery, rubber machinery, metallurgical machinery, wire and cable machinery, pressing machinery, and other related winding and processing industries for unwinding and rewinding tension control systems. Its characteristics are as follows:
1. Using imported bearings and magnetic powder, environmentally friendly and noise free, the operation is quite quiet and smooth;
2. Using imported magnetic powder with high heat resistance, it has a long service life and a relatively large heat capacity;
3. Large and easy control range, with good linearity;
4. High precision, concentricity less than 0.01mm;
5. No leakage of magnetic particles, imported wool felt, effectively preventing the leakage of magnetic particles, etc.
The installation diagram of the shell rotating magnetic powder brake is as follows:
1. Be sure to embed the fitting part of the bracket into the installation plate and tighten it properly;
2. The concentricity between the insertion shaft and the load shaft of the rotating magnetic powder brake on the outer shell must be controlled within 0.05mm. As it is an outer rotation, it is necessary to use a well ventilated metal mesh or other device.
Note: Our company's products are identical in specifications, models, and installation dimensions to Mitsubishi ZA-Y magnetic powder brakes from Japan, and can replace original Japanese products.
The following is the specification, model, and size parameter table of our company's shell rotating magnetic powder brake. We welcome new and old customers to choose for free.
Similar Product Recommend
