Shielded cable for digital patrol detection device

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Detailed description: KJYVP for instrument control cables and shielded cables for digital patrol detection devices comply with the flame retardant and fire resistance characteristics test specified in GB12666-90 standard Q/WTX608-2006. The product features and uses are suitable for instrument control cable products with AC rated voltage of 450/750V and below. The shielded cables for patrol detection devices use twisted aluminum-plastic composite tape shielding and copper wire braided shielding, with superior anti-interference performance and are widely used in computer measurement and control devices

Product Details

Detailed description: Control cables for instruments and shielded cables for digital patrol detection devices

KJYVP
The flame retardant and fire-resistant characteristics test in accordance with the standard Q/WTX 608-2006 complies with the product characteristics and uses specified in GB12666-90. It is suitable for instrument control cable products with AC rated voltage of 450/750V and below. The shielding cable of the patrol detection device adopts twisted aluminum-plastic composite tape shielding and copper wire braided shielding, with superior anti-interference performance, and is widely used in computer measurement and control devices. Usage characteristics: 1. AC rated voltage: U0/U 450/750V. 2. High operating temperature not exceeding 70 ℃. 3. Cable installation and laying temperature should not be lower than 0 ℃. 4. Cable allowable bending radius: Non armored cable allowable bending radius not less than 10 times the outer diameter of the cable. Copper tape shielding or steel tape armor allowable bending radius not less than 12 times the outer diameter of the cable