Silver ion sterilizer

1Silver ion sterilizerworking principle

The bactericidal function of silver ions is achieved by the combination of positively charged copper silver ions and negatively charged bacterial cells, which penetrate the cell wall and specific areas within the cellDNAandRNACombining and destroying the proteases and respiratory enzymes of bacterial cells, causing dissolution and death of bacterial cells.Silver ion sterilizerComposed of an electrical control device, a stainless steel casing, and a copper silver electrode chamber. After the equipment is running, the microcomputer controller outputs low-voltage DC current,Two silver metal blocks are respectively a cathode and an anode. Under the action of low-voltage direct current, copper silver metal will produce copper silver ions at the anode; When water passes through the device cylinder, copper and silver ions diffuse into the water under the action of water flow, purifying the water. The control device controls the amount of copper and silver ions generated by regulating the magnitude of the direct current; And set a time control polarity conversion to prevent unequal consumption of electrodes. When both electrodes have been consumed, a new pair of electrodes needs to be replaced to continue use.

2、 CopperSilver ion sterilizerProduct features:

Sterilization, disinfection, and algae killing

1.Silver ion disinfection can be used alone or in combination with low concentrations of free chlorine (sodium hypochlorite, calcium hypochlorite, chlorine dioxide, etc.) or oxidizing disinfectants such as ozone. Experimental results have shown that,0.4mg/Lcu.0 04mg/LAg'plus0.2mg/LFree chlorine ratio used alone1mg/LFree chlorine disinfection has a fast speed70This proves that silver ions have a significant synergistic effect with other disinfectants and can prevent microorganisms from developing resistance to a single disinfectant.

2.Legionella pneumoniae is difficult to kill under conventional chlorine conditions, but when exposed to suitable temperatures(25℃~45℃)It will rapidly reproduce and spread through water mist;Although the high temperature (greater than)60℃) and high chlorine (dry)3mg/LFree chlorine can control its reproduction, but cannot completely kill it, while copper silver ion disinfection alone has a strong bactericidal effect on Legionella pneumoniae. So silver ionization water treatment technology is the main method for controlling Legionella in building water systems.

3.Copper and silver ions are fungicides against poliovirus.

IIISilver ion sterilizertechnical advantage

1Non toxic products, secondary pollution, etc

2Colorless, odorless, and highly stable.

3Not affected by temperature, it can maintain its sterilization effect for a long time. This is something that cannot be achieved by disinfection technologies such as ozone, ultraviolet radiation, and pharmaceuticals

4When used in conjunction with ozone disinfectors, it has a stronger synergistic effect.

5No need for dedicated personnel to manage and maintain.

4、 Application areas:

1Central air conditioning circulating water and industrial circulating water system;

2Swimming pools, scenic water, water parks, bathroom disinfection;

3Sterilization and disinfection of aquatic products, aquaculture, and aquariums;

4Medical water supply;

5Disinfection of drinking water such as domestic water and secondary water supply.

5、 Device application environment

Input power supply:AC220V±10%；50HzWork pressure ≤1.0MPa

Ambient temperature0～50℃ Operating Temperature5-95℃

Environmental humidity: ≤95%Equipment power:15-520W

VISilver ion sterilizerTechnical parameter table:

7Silver ion sterilizerInstallation method and maintenance management

1 Should ensureThe electrodes of the silver ion water processor are vertically installed on the main or bypass pipeline between the circulating water pump and the filtering sand tank (installed on the bypass pipeline for easy maintenance in the later stage).

2 The water passing through the electrode cannot be carried into the air when the equipment is placed upright,Ensure that all electrode pads are immersed in the passing water.

3 The equipment is installed between the water tank outlet pipe and the feed pump. If the installation conditions are limited, it needs to be installed inA one-way check valve needs to be installed on the outlet pipeline of the electrode,Prevent the water in the pipeline from falling back and causing excessive impact pressure on the electrodes after the water pump stops running, resulting in equipment damage

4 Micro electrolysis electrodes need to be replaced regularly.