-
E-mail
2355834892@qq.com
-
Phone
1800-2922-997,1800-2922-993
-
Address
No. 13 Lichang Road, Songmushan Village, Dalang Town, Dongguan City, Guangdong Province
Product Categories
Dongguan Tailing Electromechanical Co., Ltd
Single axis micro magnetic powder brake TL-POD-C type
NegotiableUpdate on 05/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The single axis micro magnetic powder brake adopts DC24V, with four standard torque specifications including 0.5Nm, 1Nm, 2Nm, 5Nm, etc. It can be used from 5min and has a maximum speed of 1800r/min
Product Details
single-axisMicro magnetic powder brakeAdopting DC24V, there are four standard torque specifications including 0.5Nm, 1Nm, 2Nm, and 5Nm, with a minimum of 5rmin available for use and a maximum speed of 1800r/min. This is a small and compact micro series designed by Tailing Transmission,Single axis miniature magnetic powder brakeIt has the characteristics of small size, light weight, high-speed response, smooth operation, precise braking, stable torque, quiet operation, good heat dissipation, simple installation, and durability. It is a high-precision transmission component widely used in industries such as textile, printing, packaging, and other electronic equipment.
Single axis micro magnetic powderbrakeThe device has high construction accuracy and precision. The idle torque should not exceed 3% of the rated torque at 1000r/min and 5% of the rated torque at 1800r/min. Please use an elastic coupling to connect the brake shaft and load shaft during installation, and ensure that the concentricity is within the allowable range.
Single axis micro magnetic powderbrakeThe installation procedures for the device are as follows:
Firstly, prepare the installation plate, bracket, and elastic coupling components for installation before installation;
Secondly, first insert the components of the bracket into the mounting plate and fix them with screws;
Thirdly, it is necessary to use an elastic connector to connect the input shaft and output shaft, and pay attention to the concentricity and right angle between the connector and output shaft. Please use it within the allowable error range of the elastic connector;
Fourth, install the pulleys or chain gears that need to be installed with the output shaft, and use them within the allowable range of shaft end load;
Fifth, single axis micro magnetic powderbrakeAfter installation, please conduct a trial run. Only after the trial run shows no abnormalities can it be put into use;
Sixth, please check the micro magnetic powder before putting it into usebrakeCheck for any looseness in the components such as the mounting plate, coupling, and bracket to ensure their safe and reliable operation.
Single axis micro magnetic powderbrakeMaintenance and upkeep guidelines for equipment:
1. Moisture in magnetic powder can affect its performance, please take measures to prevent water or oil from seeping into the interior of the product;
2. The lifespan of magnetic powder varies depending on the usage conditions. Although it is not possible to indicate the replacement time of magnetic powder, it can be considered appropriate when the torque decreases to 70% of the initial value;
3. Please check if the bolts used for installing the coupling are loose.
Single axis micro magnetic powderbrakeThe device has high construction accuracy and precision. The idle torque should not exceed 3% of the rated torque at 1000r/min and 5% of the rated torque at 1800r/min. Please use an elastic coupling to connect the brake shaft and load shaft during installation, and ensure that the concentricity is within the allowable range.
Single axis micro magnetic powderbrakeThe installation procedures for the device are as follows:
Firstly, prepare the installation plate, bracket, and elastic coupling components for installation before installation;
Secondly, first insert the components of the bracket into the mounting plate and fix them with screws;
Thirdly, it is necessary to use an elastic connector to connect the input shaft and output shaft, and pay attention to the concentricity and right angle between the connector and output shaft. Please use it within the allowable error range of the elastic connector;
Fourth, install the pulleys or chain gears that need to be installed with the output shaft, and use them within the allowable range of shaft end load;
Fifth, single axis micro magnetic powderbrakeAfter installation, please conduct a trial run. Only after the trial run shows no abnormalities can it be put into use;
Sixth, please check the micro magnetic powder before putting it into usebrakeCheck for any looseness in the components such as the mounting plate, coupling, and bracket to ensure their safe and reliable operation.
Single axis micro magnetic powderbrakeMaintenance and upkeep guidelines for equipment:
1. Moisture in magnetic powder can affect its performance, please take measures to prevent water or oil from seeping into the interior of the product;
2. The lifespan of magnetic powder varies depending on the usage conditions. Although it is not possible to indicate the replacement time of magnetic powder, it can be considered appropriate when the torque decreases to 70% of the initial value;
3. Please check if the bolts used for installing the coupling are loose.
The following is our single axis micromagnetic powderbrakedeviceSpecificationsModel size parameter table:
Similar Product Recommend
