Single machine high-speed blower and gear combination compressor

Product Features:
·The air compression system, cooling system, lubrication system, and control system are integrated into one, with a single line assembled overall structure and standard module design. It has low noise, small vibration, and occupies a small area. It is lightweight and easy to install, maintain, and repair.
·The key core components (gears, bearings, oil pumps, filters, oil coolers, monitoring components, etc.) are all made of internationally renowned brands.
·Efficient qigong efficiency, achieving optimal aerodynamic effects, with impeller efficiency exceeding 92%.
·Sliding bearings should be used, so they can be maintained for a long time without maintenance. Even if they are repaired, they are easy to operate due to their simple structure, light weight, and ease of use.
·The outer diameter of the rotor GD2 is 30% -40% smaller than that of the binary centrifugal impeller, making it easier to start.

Main components of the laminating machine
·Air compression components: impeller, diffuser, volute
·Gear transmission components: gears, bearings
·Sealing components: oil seal, air seal, oil and gas isolation

Product Usage:
·Used for petrochemical and ironmaking equipment
Can be used for raw material air source, natural combustion treatment, chemical reaction, converter air supply, sulfur recovery unit, titanium acid unit, maleic acid unit, acrylic acid unit, etc.
·Used for suction and pressure delivery of various gases
Can be used for gas circulation in processes such as carbon dioxide, ammonia, natural gas, chlorine gas, coke oven gas, etc.
·Used for manufacturing food and pharmaceuticals
Can be used for reactions, fermentation, raw material air transportation, waste gas and wastewater treatment, etc.
·Used for public utilities
It can be used for urban sewage aeration, urban gas transportation, thermal power generation smoke exhaust, desulfurization pressure gas delivery, caisson pressure gas delivery, tunnel engineering gas delivery, and soil and sand transportation.
·Used for other assignments
Can be used for air curtains, air knives, drying, etc.

Single machine high-speed SH series
Structural feature: Single machine cantilever
Technical Specifications:
Flow range: Q=50-1800m3/min
Maximum working pressure: Pc=0.25Mpa
Working speed: n=5000-43000r/min

Gear type G series
Structural features: Gear type multi-stage compression, each stage of compression is cooled by an intercooler to reduce the temperature of the gas and ensure the lowest energy consumption
Technical Specifications:
Flow range: Q=50-1800m3/min
Working speed: Pc=0.25-4.0Mpa

Control system:
There are three types of standard control systems, namely Type 1, Type 2, and Type 3 (the main components are all imported products. For painless process flows, PLCs produced by companies such as GE/AB/SIMEMS/OMROM are selected for the controllers).
All have the following persuasions:
1. Anti surge control
2. Unit status monitoring
3. Alarm and interlock protection
4. Fault analysis
5. Pressure and flow regulation control
6. Communication
According to different automation requirements, there are on-site primary control systems (Type 1), which can be installed in two ways: wall mounted and bracket mounted: on-site and remote secondary control systems (Type 2); Local and remote three-level control system (Type 3).
The basic differences are as follows:
1. First level control, capable of controlling individual units (one CPU corresponds to one unit), and can independently control itself without being associated with other units.
2. Secondary control, on the basis of primary control, an additional set of coordination control panel has been added to complete the coordination work between multiple units.
The sewage treatment industry involves complex tasks such as gas supply allocation, grid connection, grid delay, and grid withdrawal.
3. Third level control, based on the second level control function, completes communication with other PLCs or DCS to meet new automation and management needs.