Sodium hypochlorite generator for water disinfection and sterilization

Sodium hypochlorite generator for water disinfection and sterilizationIt uses sodium chloride as raw material, electrolyzes dilute salt water to produce sodium hypochlorite solution, and adds it to water for disinfection. Sodium hypochlorite is a strong oxidant and disinfectant, which is produced by electrolyzing dilute solutions of widely available and inexpensive industrial salts or seawater without membranes. To ensure the freshness and high activity of sodium hypochlorite texture. To ensure the disinfection effect, this device adds sodium hypochlorite while it is being used. It has the same oxidizing and disinfecting properties as chlorine and its compounds.

Sodium hypochlorite generator for water disinfection and sterilizationThe structure of a sodium hypochlorite generator mainly consists of an electrolytic cell system (which contains the core component of the sodium hypochlorite generator, the electrolysis electrode), an electrolysis power supply system, a circulation system, a storage system, a control system, and a dosing system.

Operation instructions for sodium hypochlorite generator:

1. Before operating the sodium hypochlorite generator equipment, thoroughly understand the user manuals for each component of the system.

2. Before starting the equipment, check the normal valve status: 1) The main inlet valve is open, 2) The inlet and outlet valves of the brine pump are open, 3) The inlet and outlet valves of the dosing pump are open, 4) The inlet valve of the brine valve of the electrolytic cell is open, 5) The outlet valve of the electrolytic cell is closed, 6) The inlet and outlet valves of the water softener are open, 7) The acid washing and discharge outlet of the electrolytic cell is closed, 8) The hydrogen discharge outlet is unobstructed, 9) The acid washing valve is closed

When shutting down, first turn off the electrolysis power switch, close the main inlet valve, and cut off the main power supply.

4. Before opening the electrical control cabinet, it is necessary to check whether there is any looseness or detachment in the wiring of the peripheral equipment and detect the grounding resistance.

5. The electrolytic power supply is only allowed to be powered when the electrolytic cell is at full liquid level to prevent sparks from igniting the hydrogen gas left in the electrolytic cell when the electrode plates are energized, which can cause explosion and serious damage to personnel and the surrounding environment.

6. Adjust the current and voltage of the electrolysis power supply according to the dosage of the sodium hypochlorite generator equipment. When the indoor temperature is high during summer, attention must be paid to the temperature rise of the electrolysis cell to prevent damage to the electrolysis cell when the temperature rises. If necessary, lower the electrolysis current.

7. Before manually switching to automatic operation, observe the parameters of each node of the sodium hypochlorite generator equipment. The equipment alarm must be confirmed and restarted after ensuring that there are no abnormalities.

8. Sodium hypochlorite generator acid washing: The Xiangyi Yuansheng brand sodium hypochlorite generator has a transparent electrolytic cell system, which can visually observe that the electrolytic plate is covered with white scale or that acid washing is required when the electrolysis voltage increases by about 20% during electrolysis. The frequency of acid washing depends on the specific situation on site.