Spiral conveying press machine

Spiral conveying press machineIt adopts a structure form of shaftless spiral blades and outlet pressurized door panels, which integrates conveying, pressing, and dehydration, and has the advantages of continuous and sealed conveying. It mainly consists of the feeding area, spiral conveying area, pressing area, and dehydration area, and has the advantages of continuous and sealed conveying. The spiral conveyor press has a simple structure, high conveying efficiency, and good dewatering effect.

working principle

The main principle is achieved through a high-strength special spiral body. Impurities and pollutants enter the spiral tube from the feeding hopper, and under the action of the squeezing screw, the impurities are pushed into the mass pressing area through the spiral blades. Under the counter spring pressure inside the pressing tube and the discharge door cover, they are compressed, dehydrated, and transported to the slag outlet.

Product Features:

1Compact structure, small footprint, easy installation and maintenance

2Except for the open inlet and outlet of the material, the rest of the area belongs to a closed zone, and pollutants will not overflow, reducing air pollution.

Product Installation

Spiral conveying press machineInstall the entire machine on site and connect and assemble the sealing covers of the feeding port and the discharge port of the grid machine with bolts. After installation, inspect according to technical requirements to ensure that the tolerance value meets the specified indicators. Before operation, add lubricating grease and run without load2At the hour, the spiral blades and groove body run in normally, the driving device rotates flexibly, runs smoothly, and the bearing temperature rise does not exceed70There are no gaps or leaks at the sealing cover and cover plate

Notes:

1Check whether the equipment is intact and undamaged when receiving the goods

2Check if the gearbox lubricating oil is fully filled before starting up

3Idle after startup2Check if the motor rotation direction is correct and if there are any abnormal noises. If any abnormal noises are found, immediately stop the machine for inspection.