Spray dedusting of construction waste

Construction waste spray dedusting equipment

With the progress of industrialization, construction waste is increasing rapidly, and with the rapid development of recycling technology, large concrete or bricks need to be crushed during the recycling process, resulting in a large amount of dust and causing certain pollution to the environment.In response to the national call for environmental protection, our company strongly recommends the use of construction waste spray dust removal equipment for dust suppression.

Advantages of spray dedusting equipment:

1. Green, energy-saving, and do not generate secondary pollution

2. It is suitable for both indoor and outdoor, and can reflect the spray dust removal function

3. High efficiency, with indoor water mist coverage of over 95% and outdoor coverage of over 70%

4. The amount of spray can be adjusted according to the use requirements

5. Intelligent control system, no need for personnel supervision

Working principle of spray dedusting equipment

The spray dedusting equipment is a motor driven plunger pump that pressurizes the water purified by the ultra strong filter to 7Mpa, and sends the pressurized water to the "ultra fine" nozzle for atomization (also called nozzle) through the high-pressure resistant thick wall pipeline. Under a certain flow rate and a specific pressure, the water flow is atomized into a fine water mist and sprayed into the air through rotation or impact. Its dust trapping functions include:

1) Within the range of mist action, high-speed flowing water mist molecules collide and come into contact with floating dust, wetting the dust particles and causing them to sink under the influence of gravity;

2) The high-speed flowing mist attracts the dusty air around it to moisten and sink inside the mist;

3) Wet and bond the settled dust particles to prevent them from flying and achieve dust removal effect!

Why use spray dedusting equipment:

The following reasons make spray dedusting equipment an energy-saving product:

1. When developing the high-pressure spray dust removal system, our company has taken ensuring compliance with high hygiene standards as an important part of product design;

2. It is applicable to multiple direct or indirect spray dedusting in one area or multiple areas.

3. It can keep the water usage of the system at a certain level Good condition, adjust flow as needed;

4. Low energy consumption: The direct electrical energy consumption for atomizing 1kg of water per hour is only 3-6W;

5. When the mist dedusting equipment is not used for adiabatic spray, it can also be used for adiabatic cooling, that is, cooling;

6. The maintenance cost is very low, and the water pump lubricating oil only needs to be replaced after 2000 hours of operation.

Technical Parameter