Stainless steel condensing container device

Stainless steel condensing container deviceIt can be a standalone device, such as a heater, cooler, and condenser; It can also be a component of a certain process equipment, such as the heat exchanger in an ammonia synthesis tower. Due to limitations in manufacturing technology and scientific level, early heat exchangers (condensers) could only adopt simple structures, with small heat transfer areas, large volumes, and bulky structures, such as serpentine heat exchangers. With the development of manufacturing technology, a shell and tube heat exchanger has gradually emerged, which not only has a large heat transfer area per unit volume, but also has good heat transfer effect. It has long been a typical heat exchanger in industrial production. According to the different heat transfer methods, it can be divided into three categories: mixed type, heat storage type, and partition type. This equipment is generally made of metal materials, among which carbon steel and low-alloy steel are mostly used to manufacture medium and low-pressure heat exchangers; In addition to being mainly used for different corrosion resistance conditions, austenitic stainless steel can also be used as a material resistant to high and low temperatures; Nickel alloys are used under high temperature conditions.

Performance specifications for condensing containers:.

Entrance: 14. 16. 18 (articulated welded conduit)

出口: M20x1.5. M27 x2. M33x2

Technical conditions for production of JB741-73 and JB1148-73.

Product Name: Condensation Container, Isolation Container, Separation Container (Instrument Installation Material), Welded Condensation Container (with Plug)

Product models: YZF1-6, YZF1-7, YZF1-8, YZF1-9, YZF1-14 FG4B isolation container

Nominal meridian: DN100, DN80, DN65, DN50

公称压力: PN1.0,PN1.6,PN2.5,PN3.2,PN4.0,PN6.4,PN16

Container manufacturing materials: 20 #, A105201304SS, 0Cr18Ni9, 1Cr18Ni9Ti, 316SS, 316L, 06Cr19Ni10, etc

Container adaptation temperature: -30 ° C-440 * C, -75 * C-330 ° C, 540C, 570 ° C, etc

Applicable media: corrosive media such as water, oil, gas, etc

Condensation container PN63 DN100 φ 18 SW 304, PN63 DN100 φ 14 SW 304

This product is widely used in industrial automatic control pipelines, petroleum, chemical, pharmaceutical, boiler, power, machinery, pipelines, and metallurgy.

Stainless steel condensing container deviceThis equipment can be used in higher vacuum distillation units (with a pressure of up to 130Pa), improving problems such as pressure drop and leakage.

Adopting a six hole design, the thickness of the condenser is reduced, and the cooling water flow rate is increased. Compared with a general condenser with the same area, the heat transfer efficiency is increased by more than 50%, and it is not easy to scale.

Using a 6-8mm gasket, it has small expansion and contraction, and is resistant to high pressure. The size of the pipe mouth and area can be changed according to user needs.

The condensation of hot air flow is achieved through the reverse flow of hot air flow and cooling water for heat exchange. The interlayer spacing is small and uniform, and the medium repeatedly diffuses and converges, effectively improving the heat transfer efficiency. After use, if any parts of the equipment are found to be damaged, they can be replaced with individual components and reassembled to prevent the entire machine from being scrapped, thereby extending the service life of the equipment.