Stainless steel heat exchanger cleaning and descaling agent

Stainless steel heat exchanger cleaning and descaling agentChemical cleaning is an effective way to remove dirt from the air conditioning system. In the past two decades since the formation of the chemical cleaning industry, the technology has transitioned from shutdown pickling technology to non-stop pickling technology, and has been widely accepted by manufacturers.Tianchen Junhua shared a comparison chart of stainless steel heat exchanger plates before and after cleaning
Our company has collaborated with the Lanhua Research Institute of the Ministry of Chemical Industry to successfully develop a neutral, non corrosive, non-toxic, and pollution-free third-generation air conditioning cleaning agent under the guidance of green environmental protection concepts. This technology is mature and effective, with ideal and reliable results. Based on the implementation of ISO9001 quality management system, a complete set of air conditioning cleaning and maintenance technical service system has been formed.
1. Air conditioning cleaning agent (acid free, non corrosive, non-toxic, non polluting)
2. Used for cleaning, descaling, sterilization, and algae removal of air conditioning systems during normal operation.
　

Stainless steel heat exchanger cleaning and descaling agentProduct Features
Non corrosive: After adding this product to the system, cleaning is completed under weak acid non corrosive conditions.
descalinggoodCan remove insoluble scale, rust, rust nodules, biological algae, and microbial sludge.
Cleaning safety: There is a phenomenon of dirt falling off during the entire cleaning process.
Easy to use: simply add the product to the running system.
Safe and harmless: harmless to human body, can be directly discharged.
Low cost: The drug cost is significantly lower than the traditional pickling cost, only 30-40% of the cost of traditional shutdown pickling.
Usage:Cooling water is collected from the bottom pool of the cooling tower, and refrigerant water is added from the expansion tank at a rate of 50kg/ton. The system cleaning is completed by itself within 8-10 hours.