Stainless steel pneumatic diaphragm pump (side outlet)

Stainless steel pneumatic diaphragm pump (side outlet)The QBY series stainless steel pneumatic plastic diaphragm pump from Gongbo brand is a new type of conveying machinery and is currently a new type of pump in China. Using compressed air as the power source, it can extract and absorb various corrosive liquids, particulate liquids, high viscosity, volatile, flammable, and highly toxic liquids.

Stainless steel pneumatic diaphragm pump (side outlet)Pneumatic diaphragm pumps are made of four materials: engineering plastic, aluminum alloy, stainless steel, and cast iron. Pneumatic diaphragm pumps use nitrile rubber, chloroprene rubber, fluororubber, polytetrafluoroethylene, polytetrafluoroethylene, etc. according to different liquid media to meet the needs of different users. Placed in various special occasions for pumping media that conventional pumps cannot pump, satisfactory results have been achieved.

1. Due to the use of gas as a power source, the flow rate is actively adjusted with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of a centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it is necessary to equip it with a reducer or frequency converter, which greatly increases the cost. The same applies to gear pumps.

2. Pneumatic pumps are reliable and cost-effective in flammable and explosive environments, such as fuel transportation, because:

Firstly, it is impossible to generate sparks after grounding;

Secondly, there is no heat generated during work, and the machine will not overheat;

Thirdly, the fluid will not overheat because the pneumatic diaphragm pump has minimal agitation on the fluid.

3. In the harsh central area of construction sites, such as construction sites and industrial and mining wastewater discharge, due to the high impurities and complex composition in the sewage, the pipelines are prone to blockage, which creates an environment with excessive load on the electric pump and makes the motor vulnerable to heating. Pneumatic diaphragm pump can pass particles and has adjustable flow rate, and it automatically stops when the pipeline is blocked.

4. In addition, the pneumatic diaphragm pump has a small volume, is easy to move, does not require a foundation, occupies a small area, and is easy and economical to install. Can be used as a mobile material conveying pump.

5. In the handling of hazardous and corrosive materials, diaphragm pumps can isolate the materials from the outside world.

6. Or ensure that there are no impurities contaminating the raw materials in some experiments.

7. Can be used to transport fluids with relatively unstable chemical properties, such as photosensitive materials, flocculants, etc. This is because the shear force of the diaphragm pump is low and has little physical impact on the material.