-
E-mail
99055469@QQ.com
-
Phone
13761659492
-
Address
Building 39, Lane 1288, Xincun Road, Putuo District, Shanghai, China
Product Categories
Shanghai Benquan Pump Industry Co., Ltd
Submersible pump equipment
NegotiableUpdate on 01/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Traditional pumps are suitable for various corrosive media such as conveyor belt particles, high viscosity, strong acids, alkalis, salts, and strong oxidants. The new type of submersible pump equipment is suitable for transporting various lightweight media such as flammable and explosive materials. The traditional submersible pump is made of corrosion-resistant materials for its housing, outlet pipe, and overcurrent components. The motor part is placed on the liquid surface, and the pump part is placed below the liquid surface, which has the characteristics of strong corrosion resistance, no blockage, and high temperature resistance. The new type of submersible pump is made of special materials for the pump body, motor, and overcurrent components. The motor and pump parts are coaxially connected and placed under the liquid surface, with features such as maintenance free, high explosion-proof, zero zone use, and low energy consumption
Product Details
Submersible pump equipmentThe vertical motor is fixed to the motor seat with bolts, and is directly transmitted to the pump, pump body, and pipe flange through an elastic coupling. It is connected by bolts to form a whole and fixed on the bottom plate. The entire submersible pump is installed on the container through the bottom plate. The axial and radial forces of the pump, including the water pressure generated during pump operation, the weight of the impeller and rotor, etc., are all generated by the one-way thrust ball bearings and single row radial ball bearings installed in the bearing box; And the sliding guide shaft bears to ensure the safe and normal operation of the pump. The bearings are lubricated with butter, and the guide bearings are lubricated with the liquid being transported. Therefore, the liquid level must be higher than the centerline of the impeller during operation. If the length L of the container is different, it can be divided into intermediate guide bearing structure and structure without intermediate guide bearing
Submersible pump equipmentThe specifications are made according to the different lengths of insertion into the container (usually 1 to 1.5m). The working part is submerged in liquid, and the axial and radial forces generated by the pump operation are supported by rolling bearings and sliding bearings, respectively; Therefore, it runs quietly and without noise. There is no liquid splashing phenomenon on the shaft seal. There is a cooling system at the sealing packing, which can remove heat with cooling water according to the temperature of the medium used by the user.
