Suzhou Hydraulic System Analysis Diagram | Suzhou Hydraulic Station

NegotiableUpdate on 05/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

In principle, the design of a micro hydraulic station is based on the Pascal principle, which means that the pressure of the liquid is consistent throughout the system. In this way, in a balanced system, the pressure applied to the smaller piston is relatively small, while the pressure applied to the larger piston is also relatively large, which can maintain the static state of the liquid

Product Details

In principle, the design of a micro hydraulic station is based on the Pascal principle, which means that the pressure of the liquid is consistent throughout the system. In a balanced system, the pressure applied to the smaller piston is relatively small, while the pressure applied to the larger piston is also relatively large, which can maintain the static state of the liquid. So through the transfer of liquid, different pressures can be obtained at different ends, thus achieving the purpose of transformation. The hydraulic jacks we commonly see use this principle to achieve force transmission

Reasons for leakage in micro hydraulic station system:
(1) Defects caused by design and manufacturing;
(2) Loose pipe joints caused by impact and vibration;
(3) The dynamic seals and mating parts are worn out against each other;
(4) The oil temperature is too high and the rubber seal is incompatible with the hydraulic oil, resulting in deterioration. Below, we will discuss the measures to control leakage based on the above aspects.