Taimai 300kg wheelchair electronic scale with RS232 compatible system

Taimai 300kg wheelchair electronic scale with RS232 compatible system

Product Name: Dialysis Wheelchair Scale

Weighing range: 300kg

Division value: 100g

Scale platform size: 0.8 × 0.8m

Weight of the scale body: 56kg

Armrest height: 1m

Slope height: 40mm

Exterior structure: with two handrails and one slope

Scale body material: patterned carbon steel baked paint process

Application scope: Dialysis room

Taimai 300kg wheelchair electronic scale with RS232 compatible systemFeatures:

·High precision, good impact resistance, good stability, long service life, and low failure rate

·The scale body is made of welded carbon steel, and the patterned carbon steel anti slip scale platform is treated with sandblasting and acrylic paint on the surface, resulting in high overall strength

·No frame, low table with slope, U-shaped beam structure

·Protected load-bearing legs with lower ground requirements

·Equipped with four alloy steel or stainless steel weighing sensors

·It can be easily connected to a weight control display to read weight data and activate other functions.

·Can be connected to RS232 interface or directly connected to printer interface. Can connect to remote display within 10 meters.

Precautions for use:

1. The wheelchair scale is a precision instrument, please refer to the spirit level to adjust its horizontal position before use.

2. Do not exceed the weighing range, as overloading may damage the product.

3. Please use at room temperature and do not place in environments that are too cold or too hot.

4. Please place the wheelchair scale in a clean environment, as dust, dirt, moisture, vibration, airflow, and near electrical appliances can all affect the accuracy of the product.

5. Avoid severe shaking, landing, or vibration to ensure that the wheelchair scale is impacted.

6. Push the wheelchair in the center position of the scale during use to balance the force on the scale sensor and avoid affecting the service life of the scale.

7. If the weighing instrument is not used for a long time (such as more than a month), it should be powered on and checked according to the environmental conditions to avoid moisture or other adverse gas corrosion affecting reliability.

8. Due to the potential threat of rodent infestations in many applications, some of the electronic scale signal lines are exposed, so caution should be taken against rodent infestations.

9. Regularly clean up the debris on the sensor to avoid touching it and causing phenomena such as weighing prohibition and jumping.

10. Regularly open the scale cover and remove any debris underneath to ensure the stability of the wheelchair scale.