-
E-mail
litaoshai@foxmail.com
-
Phone
13341683726
-
Address
No. 333 Chengxiang Road, Fengxian District, Shanghai
Product Categories
Shanghai Litao Automation Technology Co., Ltd
Technical parameters of impact wear tester for protective clothing
NegotiableUpdate on 03/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The technical parameters of the impact and wear tester for protective clothing are used to test the protection of motorcycle riders under conditions such as wear and tear caused by impact while riding on gravel roads.
Product Details
Technical parameters of impact wear tester for protective clothing
1Introduction
Test the protection of motorcycle riders against wear and tear caused by impacts while riding on gravel roads.
Intelligent control, on the control surfaceBoard isCan be set for testingFrequency and requirementsAs long as the required parameters are entered in the console, the machine will automatically cycle through testing. During the testing process, you can pause the test at any time, open the safety door, and observe the degree of sample loss；
Adopting servo drive, the motor response time is short, without speed overshoot or uneven speed phenomenon；
2、 Key pointparameter
parameter item |
Specifications |
control system |
industrial-gradePLC |
operating interface |
colorful7Inch touch screen, switching between Chinese and English |
Operation method |
Full touch operation, capable of setting, calling, and modifying test programs |
printer |
Embedded printer |
Belt transmission speed |
8m/s |
The hardness of the belt |
granularityOP60 |
wear area |
1963mm2 |
Apply force to the sample |
49N |
Net pressure on the sample |
25kPa |
Falling height |
50mm |
Sample holder |
Diameter Φ 75mm |
cleaning brush |
Diameter Φ 200mm, polypropylene bristles 0.2mm, free length 45mm; |
USBTest software socket, read data, can connect to computer | |
IIIexecuteStandards and Applicable Scenarios
meet the standards
strictly followGB/T24278-2019；
Typical applications:
Batch quality inspection of production line;
Third party laboratory certification.
4、 Configuration List
host1Taiwan;
Instruction Manual1copy;
Certificate of Conformity1copy;
Warranty Card1copy;
Delivery Receipt1copy;
nameplate1block;
power cord1root;
wrench1set;
Several brochures;
5Maintenance and upkeep:
The device is not suitable for a long time, please cover it with a dust-proof cloth
The surface of the machine should be cleaned before and after the experiment every day to maintain cleanliness
Similar Product Recommend
