Welcome Customer !

Membership

Help

Dongguan Tailing Electromechanical Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

Dongguan Tailing Electromechanical Co., Ltd

  • E-mail

    2355834892@qq.com

  • Phone

    1800-2922-997,1800-2922-993

  • Address

    No. 13 Lichang Road, Songmushan Village, Dalang Town, Dongguan City, Guangdong Province

Contact Now

Tension sensor, tension detector manufacturer wholesale supply

NegotiableUpdate on 05/01
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The tension sensor is a tension detector, which is an instrument used to measure the tension value of the coil during the tension control process

Product Details

tension sensorIt is a tension detector, which is an instrument used to measure the tension value of the coil during the tension control process. Usually accompanied by accessoriesFully automatic tension controllerMagnetic powder clutch and magnetic powder brake can be installed on the ground, wall, or ceiling. It detects the bending degree of the leaf spring under load with high precision, and then detects the tension feedback to the fully automatic tension controller.

张力传感器一般应用示意图

Working principle of tension sensor (tension detector): The strain gauge inside the tension sensor is a resistance strain gauge. The working principle of metal resistance strain gauges is the phenomenon where the strain resistance changes with mechanical deformation due to adsorption on the substrate material, commonly known as the resistance strain effect.
Tai Ling brandtension sensorIt has the characteristics of light weight, small size, fast response speed, low temperature drift, high stability, and good linearity, and is widely used in industries such as paper mills, steel mills, foil production plants, pharmaceuticals, cable laying, and sawmills.
Precautions for installation and use of tension sensors (tension detectors):
1. The tension detector should not be subjected to strong impact or vibration at any time, otherwise it will cause damage to the tension detector;
2. When using side fixation, it is important to note that the fixing screws should not be too long, otherwise it may cause damage to the measuring mechanism inside the tension detector;

3. The screws for installing the tension detector and bearing seat should not be too long. If they are too long, it will cause the spring of the tension detector to not work properly and the tension cannot be detected.

张力传感器(张力检测器)说明书

张力传感器,张力检测器张力传感器,张力检测器