Top mounted inclined ball valve

NegotiableUpdate on 02/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The top mounted inclined ball valve adopts a double-sided double-layer sealing structure, with two layers of soft and hard secondary seals on each side. In installation conditions, when the soft seal ages due to long-term use, its hard seal begins to perform post sealing, overcoming the fatal weakness of leakage caused by seal aging.

Product Details

Top mounted inclined ball valveIt adopts a double-sided double-layer sealing structure, with two layers of soft and hard secondary seals on each side. In installation conditions, when the soft seal ages due to long-term use, its hard seal begins to perform post sealing, overcoming the fatal weakness of leakage caused by seal aging. The inclined top mounted ball valve is an integral top mounted type, which does not require the valve to be removed from the official road. Simply remove the valve cover for maintenance or replacement of parts, making maintenance more convenient. The valve is designed as a double slope type, which has the ability to automatically adjust the sealing between the valve seat and the valve body ball under the action of the spring, ensuring good sealing performance under medium and low pressure conditions. The sealing of the contact part between the valve stem and the valve cover is achieved by compacting and sealing between the packing plate plane and the shoulder plane of the valve stem and valve cover, reducing the opening torque. Widely applicable to industries such as chemical, petroleum, petrochemical, natural gas, metallurgy, refining, pharmaceuticals, food, environmental protection, and urban construction.

Top mounted inclined ball valvestructural diagram

Main technical parameters

Nominal Diameter	40		2.5	MPa
Test pressure	strength test	Test medium (water)	3.75
	Upper Seal Test		2.75
	Sealing Test		2.75
	gas tightness test	(Qi)	0.6
Operating Temperature	-20～232℃	Great work pressure	2.5
Applicable Medium	water, oil, gas

Main external dimensions

Nominal pressure (Mpa)	Nominal Diameter	L	D	D1	D2	D6	b	f/f1	z-φd	W	H（mm）
Nominal pressure (Mpa)	mm	mm	D	D1	D2	D6	b	f/f1	z-φd	mm	Q41
1.6 Protruding surface	15	130	95	65	45	-	14	2	4-14	100	62
	20	140	105	75	55	-	14		4-14	120	68
	25	150	115	85	65	-	14		4-14	160	75
	32	165	135	100	78	-	16		4-18	180	85
	40	180	145	110	85	-	16		4-18	200	95
	50	200	160	125	100	-	16	3	4-18	250	110
	65	220	180	145	120	-	18		4-18	300	130
	80	250	195	160	135	-	20		8-18	400	155
	100	280	215	180	155	-	20		8-18	500	180
	125	320	245	210	185	-	22		8-18	600	250
	150	360	280	240	210	-	24		8-23	800	275
	200	400	335	295	265	-	26		12-23	1000	345

Main external dimensions

2.5MPa Protruding surface	15	130	95	65	45	-	16	2	4-14	100	62
	20	140	105	75	55	-	16		4-14	120	68
	25	150	115	85	65	-	16		4-14	160	75
	32	165	135	100	78	-	18		4-18	180	85
	40	180	145	10	85	-	18	3	4-18	200	95
	50	200	160	125	100	-	20		4-18	250	110
	65	220	180	145	120	-	22		8-18	300	130
	80	250	195	160	135	-	22		8-18	400	155
	100	280	230	190	160	-	24		8-23	500	180
	125	320	270	220	188	-	28		8-25	600	250
	150	360	300	250	218	-	30		8-25	800	275
	200	400	360	310	278	-	34		12-25	1000	345

Note: The above product introduction, parameters, images, and data are for reference only