-
E-mail
114667098@qq.com
-
Phone
15900758649
-
Address
No. 5, Lane 108, Tangming Road, Songjiang District, Shanghai
Product Categories
Shanghai Yinghao Electromechanical Equipment Co., Ltd
Two degree of freedom attitude adjustment platform [rotating test bench] used for tracking fatigue testing of ship and aircraft equipment
NegotiableUpdate on 04/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Two degree of freedom attitude adjustment platform [rotating test bench] used for tracking fatigue testing of ship and aircraft equipment
Product Details
Product Introduction
|
name |
Two degrees of freedom+Rotating axis testing platformSports performance indicators |
||||
|
Main technical indicators |
(1) Payload: 300kg， Total load: 500kg (including platform weight). |
||||
|
(2) Motion parameters: |
|||||
|
posture |
displacement |
speed |
acceleration |
Repetitive positioning accuracy |
|
|
Pitch and tilt（alpha） |
±100° |
±30°/s |
±60°/s2 |
0.1° |
|
|
Roll over（B） |
±30° |
±30°/s |
±60°/s2 |
0.1° |
|
|
Yaw direction（γ） |
±30° |
±30°/s |
±60°/s2 |
0.1° |
|
|
other technical indicators |
System response frequency: 0.0HZ-20Hz. |
||||
|
Travel deviation: ≤0.2mm. |
|||||
|
The platform system runs continuously for more than 12 hours, and the position drift of any electric cylinder does not exceed 0.00025m. |
|||||
|
Under rated load, the full stroke reciprocating working life shall not be less than 1 × 107Secondly, the storage life shall not be less than 48 months. |
|||||
|
When the platform system moves at a speed of 40mm/s, the noise intensity at a distance of 1m from the platform system is less than 70dB. |
|||||
|
a. The continuous working time of the platform system shall not be less than 48 hours. b. The service life shall not be less than 22000 hours. c. The mean time between failures (MTBF) is ≥ 2200 hours. d、 Mean time between repairs (MTBF)<4 hours |
|||||
|
power supply |
Single-phase ACThe total power of 220V is about 2.5KW |
||||
|
Control characteristics |
1The self-developed control card uses CANopen bus protocol, which has higher communication speed, mature technology, and higher stability. 2The control card has high integration, simple electrical wiring of the equipment, no need for external limit switches, low failure rate and safety. 3Integrated multi axis platform algorithm for motion control card. 4The operation interface is simple, the failure rate is low, and it is stable and reliable. |
||||
|
|
|
List of Technical Parameters for Electric Cylinder |
||
|
Installation method |
Front and rear hinges |
|
|
Drive screw (mm) |
|
|
|
Effective travel distance (mm) |
come |
|
|
Rated output (N) |
Electricity |
|
|
Maximum output (N) |
Consultation |
|
|
Rated speed (mm/sec) |
inquire |
Adjustable within the range of mm/sec |
|
Maximum speed (mm/sec) |
|
instantaneous velocity |
|
Rated power of servo motor (W) |
|
Servo motor (encoder) |
|
Rated speed of servo motor (rpm) |
|
|
|
Technical parameter details of rotating shaft |
||
|
Rated power of servo motor (W) |
|
Servo motor (encoder) |
|
Rated speed of servo motor (rpm) |
|
|
|
High precision rotary platform |
|
|
|
hand over goods Qing single |
||||
|
1 |
electric cylinder |
2Taiwan |
self-developed |
|
|
2 |
servo motor |
3Taiwan |
DeltaA2 |
|
|
3 |
servo drive |
3Taiwan |
DeltaA2 |
|
|
4 |
Motion Controller |
1 set |
self-developed |
|
|
5 |
control cabinet |
1 unit |
self-developed |
|
|
6 |
DC power supply |
1 unit |
MW24Vpower supply |
|
|
7 |
Electronic control components |
1 set |
Schneider, Germany |
|
|
8 |
Control and monitoring software |
1 set |
self-developed |
|
|
9 |
hinge support |
5set |
self-developed |
|
|
10 |
upDown platform |
1 set each |
self-developed |
|
|
11 |
High precision rotary platform |
1 set |
|
|
|
12 |
platform support |
1 set |
self-developed |
|
1. User training and secondary development instructions
Before platform delivery, provide the following training to users:
(1) Platform operation training.
(2) Safety operation instructions.
(3) Training on platform instructions and interface communication.
(4) Training on fault identification and handling.
After the platform is delivered, according to user needs, assist users in secondary development of platform instructions, platform software interfaces, etc. The communication protocol between the upper and lower computers is as follows:
The communication between the upper and lower computers adoptsUDP/IP protocol, data refresh rate of 100Hz, hardware transmission speed of 100Mbps.
2. After sales service and guarantee capability
After the equipment is accepted as qualified, the warranty period is 36A month. Provide excellent service throughout the entire lifecycle of the product. Service and maintenance personnelRespond within 12 hours and arrive at the scene within 24 hours.
3. Platform upgrade service
In the platform design phase, fully consider the maintainability of the platform's hardware and software, as well as upgrade interfaces.
3.1.Software upgrade service
The control software adopts an advanced object-oriented modular design approach, with modular software function design that can be quickly replaced and upgraded.
During the warranty period of the platform, we promise to upgrade the platform software functions for free. Propose new features and requirements to users, and complete them as soon as possible after discussing feasibility and solutions with both parties.
3.2.Hardware upgrade service
A large amount of hardware in the platform adopts modular design with universal interfaces, and the platform circuit is designed according to board level maintenance and upgrade, which can be quickly maintained and upgraded.
Propose hardware upgrade requirements to users and resolve them through negotiation between both parties.
1. Working in harsh environments, it can be waterproof, explosion-proof, salt spray resistant, etc. (standard IP65, customized protection level required).
2. We can customize electric cylinders with different outputs, speeds, and strokes according to customer requirements.
3. Adopting high-precision screw and branded motor, with high positioning accuracy, fast response, adjustable stroke and speed.
4. The product has low noise, energy saving and environmental protection, and long working life. Generally, 220V power supply is sufficient for civilian use.
5. Small size, light weight, easy installation and debugging operation, good stability.
6. The motor has various protection measures such as overcurrent protection and cylinder overtravel protection to ensure the safe operation of the equipment.
Main performance indicators
1. Rated push-pull force: customizable.
2. Action frequency (maximum): 20 times per second.
3. Rated travel: 0-2000mm. Customizable
4. Working environment: high temperature resistance, dust-proof, waterproof, explosion-proof.
5. Environmental temperature: -40 ℃ to 60 ℃.
6. Relative humidity: 80% (20 ± 5 ℃).
7. No pollution.
8. Positioning accuracy of 0.05mm, generally 0.02mm, up to 0.01mm
Specific indicators can be customized according to your requirements
Please call us at 1590758649
；
1. Fast acceleration, short positioning time, and good dynamic performance! (Accurate, precise, fast, and stable)
2. Precise and stable
3. Can be used on a single axis
4. Multi axis combination and coordination
5. Modular application, automated transformation.
6. Save mechanical design space, easy installation, and strong selectivity.
7. Multiple installation and connection methods and accessories are available for design selection
8. Can be paired with various motors and motor control regulators (servo, stepper, DC, AC, etc.)
9. Multi point positioning and multi segment control are available, with simple control.
10. High transmission efficiency, energy-saving, low failure rate, basically maintenance free, and long service life.
[Scope of use]
Aerospace testing, multi degree of freedom simulation, multi degree of freedom dynamic entertainment, multi degree of freedom precision machining, robots, mechanical lifting platforms, automotive presses, automotive manufacturing equipment, mechanical automation production lines, steel continuous casting, petrochemicals, material handling, injection molding machines, mold control, valve control, precision machine tools, pharmaceutical machinery, food industry and other fields.
|
telephone |
mobile phone number |
|
URL |
|
|
|
657066798 |
http://www.y-hao.com |
Similar Product Recommend
