UV fluorescence sulfur analyzer

SH-2000SAutomatic UV Fluorescence Sulfur AnalyzerProduct Overview:

Domestic integrated sulfur analysis instruments are widely used to detect sulfur content in liquid, solid, or gas samples. Compared with similar instruments at home and abroad, it has the characteristics of stable and reliable performance, high analysis accuracy, and good repeatability.

The total sulfur content in the sample was rapidly determined by UV fluorescence method. The application of high-precision data acquisition cards and computer technology provides reliable guarantees for data acquisition, control, and processing.

The instrument system uses ultraviolet fluorescence method to determine the total sulfur content, which improves the ability to resist impurity interference, avoids the complicated operation of the titration cell by the electric method and the unstable factors caused by it, and greatly improves the sensitivity of the instrument. The key components of the system are imported, ensuring reliable performance of the entire machine.

Instrument execution standard:

SH/T 0689, ASTM D5453 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products (Ultraviolet Fluorescence Method)

SH-2000SAutomatic UV Fluorescence Sulfur AnalyzerBasic Parameters:

1. Sample types: liquid, solid, and gas

2. Determination method: UV fluorescence method (S)

3. Sample injection volume: Solid sample: 0.1-5mg

4. Liquid sample: 1-20 μ L

5. Gas sample: 1-5mL

6. Measurement range: S: 0.2~10000mg/L

7. Measurement accuracy:

8. Temperature control range: Room temperature to 1050 ℃

9. Temperature control accuracy: ± 1 ℃

10. Sample injection volume: Liquid: less than 20uL

11. Gas source requirements: high-purity argon gas: purity above 99.995%,

12. High purity oxygen: purity above 99.995%

13. Power supply: AC220V ± 22V, 50Hz ± 0.5Hz, 1500 W

14. Measurable sample status: liquid, gas (with corresponding injector), PMT high pressure range: DC500V~900V, set the required value through the operating system according to the measured concentration.

15. Requirements for instrument completeness: host (data acquisition, control system), cracking furnace, automatic sampler (gas, liquid), computer (including operating software), etc.

16. Dimensions: Host: 305 (W) × 460 (D) × 440 (H) mm

17. Temperature control: 550 (W) × 460 (D) × 440 (H) mm

18. Weight: Host: 20kg

19. Temperature control: 40kg

Suitable for determining the total sulfur content of paraffin oil, diesel, gasoline, lubricating oil, fuel oil, liquefied gas and natural gas, as well as other oil products, chemical raw materials and finished products.