WOL Design and Decoration of Biopharmaceutical Cleanroom Construction

The design and decoration plan of the biopharmaceutical clean room needs to follow strict specifications and standards to ensure the sterility of the production environment and product quality. Here is a basic design and decoration plan:

1. Planning and Layout:

Reasonably plan the workshop layout according to the production process and cleanliness requirements.

Design reasonable personnel and material flow channels to avoid cross contamination.

Set up buffer zones, such as changing rooms, air shower rooms, transfer windows, etc.

2. Wall and ceiling:

Use materials that are easy to clean, corrosion-resistant, and dust-free, such as stainless steel, antimicrobial coatings, or PVC sheets.

The corners and ceilings should be designed in circular arcs to reduce dust accumulation.

The ceiling should adopt a dust-free ceiling system to ensure uniform distribution of clean air.

3. Ground:

The ground should be made of seamless, non slip, wear-resistant, and easy to clean materials, such as epoxy resin coating or PVC flooring.

The ground should have a certain slope to facilitate cleaning and drainage.

4. Lighting and ventilation:

Adopt dust-free, explosion-proof, and UV resistant lighting equipment.

Design an efficient air filtration system to ensure that the cleanliness of the air meets GMP standards.

Maintain positive pressure in the workshop to prevent external air pollution from entering.

5. Temperature and humidity control:

Install a temperature and humidity control system to maintain constant temperature and humidity conditions in the workshop.

The temperature is generally controlled at 20-25 ℃, and the humidity is controlled at 45-65%.

6. Equipment and Furniture:

All equipment and furniture should be made of materials that are easy to clean and disinfect.

The equipment layout should be easy to operate and maintain, while reducing the risk of pollution.

7. Water system and drainage:

Design independent clean water and drainage systems to avoid cross contamination.

The drainage system should have measures to prevent odor and backflow.

8. Verification and Monitoring:

Conduct strict cleanliness testing and verification after the decoration is completed.

Install a monitoring system to monitor key parameters such as cleanliness, temperature, and humidity in real-time.

WOL Design and Decoration of Biopharmaceutical Cleanroom Construction

WOL Design and Decoration of Biopharmaceutical Cleanroom Construction