-
Phone
13523020082
-
Address
Rooms 1501-1522, Building B, Wanda Plaza, Intersection of Zhongyuan Road and Qinling Road, Zhengzhou City
Product Categories
Henan Wanda Environmental Protection Engineering Co., Ltd
Water treatment equipment in the power industry
NegotiableUpdate on 01/16
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Water treatment equipment in the power industry
Product Details
The production process of purified water equipment in the power industry may vary depending on the quality of the raw water, but the treatment process is basically the same for water sources such as municipal tap water and the vast majority of deep groundwater sources in China.
1. Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Dosing device - Precision filter - Primary reverse osmosis machine - Intermediate water tank - Intermediate water pump - EDI system - Purified water tank - Pure water pump - UV sterilizer - Micro porous filter - Water point
2. Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Dosing device - Precision filter - First stage reverse osmosis - PH regulation - Intermediate water tank - Second stage reverse osmosis - Purified water tank - Pure water pump - UV sterilizer - Micro porous filter - Water point
Henan Wanda Environmental Protection Power Industry Pure WaterEquipment product features：
1. The structural design should be simple, reliable, and easy to disassemble.
2. In order to facilitate disassembly, replacement, and cleaning of parts, the design of the actuator should use standardized, universal, and systematic components as much as possible.
3. The inner and outer wall surfaces of the equipment should be smooth, flat, without dead corners, and easy to clean and sterilize. The surface of the parts should be treated with chrome plating or other surface treatments to resist corrosion and prevent rusting. Avoid using paint on the outside of water treatment equipment to prevent peeling.
4. The preparation of purified water equipment should use low-carbon stainless steel or other materials that have been verified to not pollute water quality. The equipment for preparing purified water should be regularly cleaned and the cleaning effect should be verified.
5. The material in contact with injection water must be high-quality low-carbon stainless steel (such as 316L stainless steel) or other materials that have been verified not to pollute water quality. The equipment for preparing injection water should be regularly cleaned and the cleaning effect should be verified.
6. The storage period of purified water should not exceed 24 hours, and its storage tank should be made of stainless steel material or other materials that have been verified to be non-toxic, corrosion-resistant, and do not leak out pollutant ions. A hydrophobic sterilization filter with non shedding fibers should be installed to protect its ventilation port. The inner wall of the storage tank should be smooth, and there should be no dead corners or sand holes in the connecting pipes and welds. Sensors that do not cause stagnant water pollution and display parameters such as liquid level, temperature, and pressure should be used. Regularly clean, disinfect and sterilize storage tanks, and verify the effectiveness of cleaning and sterilization.
Purified water for the power industryEquipment product parameters：
Electrical resistivity: ≥ 0.5MΩ. CM， Conductivity: ≤ 2μS
Ammonia ≤ 0.3 μ g/ml
Nitrate ≤ 0.06 μ g/ml
Heavy metal ≤ 0.5 μ g/ml
