Weidi UPS power supply ITA2 series 5-20KVA

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

VertivLiebertITA2 series UPS is a new generation of low-power rack type UPS product launched by Vertiv based on decades of UPS design and manufacturing experience and in response to new market demands in the Internet era

Product Details

Vertiv LiebertITA2 series UPSIt is a new generation of low-power rack mounted UPS product launched by Vertiv based on decades of UPS design and manufacturing experience and in response to new market demands in the Internet era. The ITA2 series UPS currently has a capacity of 5-20KVA, which has four major customer values of "reliability, extreme, innovation, and flexibility". It is the preferred product for uninterrupted power supply for customers and a new benchmark in the industry.

feature

ITA2 is equipped with the latest generation control chip, which doubles the system control frequency and performance

Introducing innovative "independent air duct" design, isolating sensitive components, completely solving UPS failure problems caused by dust, conductive powder, etc., and improving system reliability by more than double

ITA2 UPS has passed rigorous testing and certification systems

The output power factor of ITA2 series has been increased to 1, KVA=KW， Increased carrying capacity by over 20%

Increase the input voltage range to 100-288V to avoid frequent switching of UPS to battery power mode due to voltage fluctuations

Overload capacity increased to 150%, 1min, to avoid frequent switching of UPS to bypass power supply mode due to short-term load impact

The system efficiency can reach up to 96%, doubling the energy-saving rate

ITA2 has a 30% reduction in volume and weight compared to the previous generation UPS, making it more compact and exquisite. It can be easily installed and maintained by a single person on site

5-10KVA UPS is only 2U high and 400mm deep; 16-20KVA UPS is only 3U high and 500mm deep

Standard TCP/IP network interface and dry contact interface, users can directly access and manage UPS through the network or centralized monitoring and management platform (such as our RDU monitoring system)

ITA2 comes standard with a large-sized LCD display screen, which has gravity adaptive function and can automatically recognize the installation method of UPS (tower/rack)

When configuring battery modules, ITA2 can automatically identify the number of battery modules and predict battery backup time, with prediction accuracy improved to within 10%

Design compatible with input/output isolation transformers, input diesel generators, etc

Based on a new system level reliability design, ITA2 can not only be applied in traditional commercial fields, but also adapt to scenarios such as light industry, high altitude, marine, and vehicle mounted applications

The number of battery cells can be flexibly adjusted to 12, 16, and 20 (16/20K is 24, 32, and 40 cells)

Supports tower and rack installation methods, with a height of only 2-3U

system parameters

Adapt series parameter table	5KVA		10KVA		16KVA	20KVA
	standard model	Long latency models	standard model	Long latency models	Long latency models	Long latency models
model	UHA1R-0050	UHA1R-0050L	UHA1R-0100	UHA1R-0100L	UHA3R-0160L	UHA3R-0200L
input parameters
Type of rectifier	IGBT rectifier
rated voltage	220/380Vac single-phase three wire/three-phase four wire		220/380Vac single-phase three wire/three-phase four wire		380Vac three-phase four wire
Input voltage range	Single phase 120Vac~276Vac		Single phase 120Vac~288Vac		Three phase 228Vac~478Vac
Input frequency range	45Hz～55Hz
Input power factor	Single phase>=0.99/Three phase>=0.95				Full load>0.99
battery
Battery Type	Lead acid maintenance free battery
charging capability	Recharge the standard machine to 90%<3h		Recharge the standard machine to 90%<6h		Maximum charging power 4.5KW
Standard machine battery backup time	>5 minutes				…
Battery module model	U16-07C1
Battery module specifications	430W × 660D × 88H (with a height of 2U inside the rack), 50Kg
output parameters
rated power	5KVA/4.5KW or 6KVA/4.5KW (can be set on site)		10KVA/9KW		16KVA/14.4KW	20KVA/18KW
rated voltage	Single phase 220Vac				Three phase 380Vac, single-phase 220Vac
Voltage stability	3%				1%
Frequency stability	0.25%
output voltage	<3% linear load				<2% (linear load)
waveform distortion rate	<5% non-linear load				<5% (non-linear load)
Maximum peak factor of load	3:01
Step load capacity	100%
output method	terminal
Overload capacity (% rated load)	1 minute at 125% rated load		105%～125％ 5mins，125％～150％ 1min， More than 150% 500ms		105％～125％ 5mins，125％～150％ 1min， More than 150% 200ms
System parameters and standards
Change type	Dual transformation online
Can parallel operation be achieved	Supports up to 3+1 parallel operation
Installation method	Rack/tower compatibility
overall efficiency	>92%		>92.5%		Up to 94%
switch time	0 ms
noise	<50dB		<55dB		≤58dB
language	Chinese-English translation
Is there an LCD display	Yes (optional)				Yes (standard)
Safety Regulations	IEC/EN62040-1-1
Electromagnetic Compatibility	IEC/EN 62040-2，IEC/EN61000-3-11，IEC/EN61000-3-12，YD/T1095-2008
surge protection	IEC/EN 62040-2
Protection type	IP20
Volume W × D × H (mm)	430 × 660 × 882U, with 4U battery	430×660×88	435 × 660 × 882U, with battery 6U	435×660×88	435×750×130 3U
Net weight of the host	23Kg	25Kg	24.8Kg	25.5Kg	35Kg
warranty	3 years		1 year
Communication and Management
interface type	USB/Smart Card Slot (Dry Point Card/Dry Point Expansion Card/SIC Card/Modbus Card/RS485 Card)
Management software	SiteMonitor
environmental parameters
Operating temperature	0～＋40℃
relative humidity	5-95%, no condensation
Maximum altitude	<1500m， (When exceeding 1500m, refer to GB/T3859.2 for derating use)				＜ 2000m (when exceeding 2000m, refer to GB/T3859.2 for derating use)

Support synchronous dual bus scheme
Support shared battery packs
Three three and three single models are available, suitable for industrial equipment use