Wi Fi wireless network noise sensor

Wi Fi wireless network noise sensor

Equipped with noise meter JHM-NS02 and Wi Fi module JHM-MFFI.

Technical parameters of network module: IEEE 802.11 standard. Users can define their own IP, port address, access hotspot, password, as well as set the destination IP and port for delivery!

Wi Fi wireless network noise sensorThe user uses the matching serial communication cable, with serial port baud rates of 9600 and 8 n、 1. The module can be configured using the serial assistant software through the computer serial port,

All command characters are capitalized, and the specific instruction operations are as follows:

a: Sending a HELP? (Enter) Give the module, and the module returns commonly used operation commands to help the operator remember them conveniently.

b: Sending CM+INFO=? (Enter), The module returns all information including the set IP, target IP, port, hotspot name, and password.

c: Sending CM+MYIP=? (Enter), The module returns its own IP address, enter CM+MYIP=IP=192.168.0.1 (Enter), and the module IP is changed to the current IP address.

d: Sending CM+OBIP=? (Enter), The module returns the IP address of the noise transmission target, input CM+OBIP=192.168.0.100 (Enter), the noise data transmission destination

Change the address to the current IP

e: Send CM+PORT=? (Enter), Query local and target port addresses, port length is limited to 5 bits or less (greater than 4000).

f: Sending CM+HOTA=? (Enter), Search for the name of the access hotspot, enter CM+HOTA=abcdeefg (Enter), abcdeefg wants to access as the hotspot name.

g: Sending CM+PASS=? (Enter), Query and set the access hotspot password, enter CM+PASS=12345678 (Enter), 12345678 is the access hotspot password.