XBD-GDL vertical multi-stage fire pump

Product Introduction and Characteristics of XBD-GDL Vertical Multi stage Pipeline Fire Pump

The XBD-GDL vertical multi-stage fire pump is a new generation of XBD pipeline type medium and low pressure fire pump assembly product developed based on the latest standard requirements of fire pumps on the basis of the original vertical multi-stage pump. This series of pumps meets the requirements of fire pumps in terms of performance, structure, materials, and matching. Due to the use of excellent hydraulic models, this series of pumps meets user requirements; Adopting a vertical pump structure, it has the characteristics of high efficiency and wide performance range, and can effectively save floor space; By using high-quality bearings and motors, the pump operates more safely, reliably, with low noise and minimal vibration; Using hydraulic balance axial force to reduce the balance drum can make the operation smoother; There are two forms of shaft seals: mechanical seals and packing seals; The pump also has the characteristics of inlet and outlet flange pipeline layout, high speed, and heavy weight.

The significance of XBD-GDL vertical pipeline fire pump model

Example: XBD 4.2/15- (I) 80 X 3

XBD: Motor driven fire pump

4.2: Rated pressure (10 times Mpa)

15: Rated flow rate (L/S)

I: Pipeline type

80: Inlet and outlet diameter (mm)

X3: Level

Application scope of XBD-GDL vertical multi-stage pipeline fire pump

Suitable for fire water supply in various occasions such as residential buildings, hotels, office buildings, commercial buildings, factories, hospitals, etc.

Performance range of XBD-GDL vertical multi-stage pipeline fire pump

Flow rate: 5-115L/s

Lift: 20~230m

Power: 3~200KW

Working conditions of XBD-GDL vertical multi-stage pipeline fire pump

1. It can transport clean water or non corrosive media with physical and chemical properties similar to clean water, and its solid insoluble matter does not exceed 0.1%.

2. Medium temperature: -15 ℃~120 ℃.

3. Maximum working pressure: XBD pump: ≤ 2.5MPa, i.e. system pressure+head ≤ 2.5MPa, XBD (I) pump: ≤ 2.0MPa.

4. The ambient temperature should not exceed 40 ℃ and the relative humidity should be less than 95%.