-
E-mail
hscchbgs@126.com
-
Phone
13831728516
-
Address
Fuzhen Industrial Zone, Botou City, Hebei Province
Product Categories
- Catalytic combustion equipment
- Dust collector design for boiler industry
- Mine dust collector
- Workshop dust control
- Dust collector skeleton accessories
- Star shaped unloader
- Single dust collector
- Product Center
- Boiler supporting dust collector
- Design of dust collector for workshop dust control
- Casting dust collector
Botou Huaze Environmental Protection Equipment Co., Ltd
XD-II type multi tube cyclone dust collector
NegotiableUpdate on 06/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Introduction: Specification and Model XD - Ⅱ -0.5 XD - Ⅱ -1 XD - Ⅱ -2 XD - Ⅱ -4 XD - Ⅱ -6 XD - Ⅱ -10 XD - Ⅱ -20 XD - Ⅱ -35 Boiler (t/h) 0.5 1 2 4 6 10 20 35 Flue Gas Processing Capacity (m3/h) 1500 3000 6000 12000 18000 30000 6000
Product Details
| Specification and model | XD-Ⅱ-0.5 | XD-Ⅱ-1 | XD-Ⅱ-2 | XD-Ⅱ-4 | XD-Ⅱ-6 | XD-Ⅱ-10 | XD-Ⅱ-20 | XD-Ⅱ-35 |
| Equipped with boiler (t/h) | 0.5 | 1 | 2 | 4 | 6 | 10 | 20 | 35 |
| Processing flue gas volume (m3/h) | 1500 | 3000 | 6000 | 12000 | 18000 | 30000 | 60000 | 105000 |
| Dust removal efficiency (%) | ＞95 | |||||||
| Body resistance (Pa) | ＜900 | |||||||
| cut diameter | 3.05 | |||||||
| weight | 310 | 570 | 960 | 1900 | 2910 | 6100 | 11750 | 20300 |
The XD-II type multi tube cyclone dust collector is an efficient dust collector with a dust removal efficiency of over 95%. The resistance of the dust collector body is less than 900Pa, and the existing boiler induced draft fan can ensure the normal operation of the boiler. This dust collector has good load adaptability, with a dust removal efficiency of over 94% at 70% load.
The cyclone element in the XD-II multi tube cyclone dust collector is made of cast iron or ceramic, with a thickness greater than 6mm, therefore it has good wear resistance. It is an ideal equipment for industrial boiler flue gas dust removal and other dust control.
