Welcome Customer !

Membership

Help

Langfang Pengheng Machinery Equipment Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

Langfang Pengheng Machinery Equipment Co., Ltd

  • E-mail

    15832660998@163.com

  • Phone

    15832660998

  • Address

    Chengnan Industrial Zone, Dacheng County

Contact Now

Xiushui County Sawdust Particle Burner 1-ton Boiler Biomass Burner

NegotiableUpdate on 05/13
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The biomass burner is developed specifically for the needs of harvesting and slow heating. It uses abundant crop straw such as corn stalks from rural areas as materials, which are pressed into uniformly shaped and sized granular fuels by molding equipment. Then, they are efficiently incinerated and converted into heat energy by a fully active granular incinerator that is commonly used in the process. The heat generated from incineration is absorbed by the circulating water in the boiler. 1 ton boiler with sawdust pellet burner in Xiushui County

Product Details

1 ton boiler with sawdust pellet burner in Xiushui County

One is the ability to fully burn fuel, converting the chemical energy in the fuel into heat energy more efficiently;
Secondly, it has good heat transfer and insulation effects, which increases the effective utilization of heat value and reduces the heat dissipation heat value;
Thirdly, waste heat can be effectively utilized to minimize smoke exhaust waste heat and other heat losses. At the same time, solid fuels can be gasified under high temperature and oxygen deficient conditions with reasonable control of the excess air supply coefficient. Therefore, in the research and design of the furnace, the lower part (gasification section) of the furnace is designed as a basically closed system, and the supply of air can be adjusted to achieve significant gasification effect of the fuel. With good gasification effect, it is necessary to ensure sufficient air support during combustion to ensure appropriate operating temperature. A secondary air intake ring (combustion section) is designed on the upper part of the furnace, and many secondary oxygen supply small holes are evenly distributed on the ring, greatly enhancing the full combustion of gasification fuel and making the combustion flame bright white. In addition, the gap size between the furnace and the bottom of the pot was optimized, and the matching size between the furnace and the bottom of the pot was found. This extended the swirling distance and time of the high-temperature flue gas flow in the furnace, avoiding the direct discharge of the burning flame into the flue, thereby reducing heat loss and improving thermal efficiency.

1 ton boiler with sawdust pellet burner in Xiushui County