YL-X series vertical and horizontal suction type

Cleaning Method

When the water quality is good and the filtration level is required to be high, it should be used. The driving device drives the sewage suction pipe to perform a spiral reciprocating motion, and the impurities on the surface of the filter screen are sucked out by the suction port on the main sewage suction pipe and discharged through the sewage outlet.

Surface interception filtration is mainly suitable for particle impurities.

Scanning suction cleaning, internal backwashing.

Online installation, occupying less space.

Regular maintenance and repair.

working principle

When water flows through the filter, impurities in the water will gradually accumulate on the surface of the filter screen inside the filter. As the filtration process progresses, the pressure difference between the inlet and outlet of the filter by the water treatment equipment manufacturer will gradually increase. When the pressure difference reaches the set value, the filter will automatically perform backwashing to remove the impurities deposited in the filter screen and discharge them.

Control method

The filter is equipped with a differential pressure switch and an integrated controller. When the pressure difference reaches the preset value, a signal is transmitted to the controller, which starts the driving device for cyclic cleaning. At the same time, it can perform timed control backwashing or manually clean according to the actual situation.

Filter flow rate: 50-7000m3/h

Filtering accuracy: 100-3500um

Structural forms: single tube and multi column

Cleaning method: scanner suction brush negative pressure water flushing

Filter forms: wedge-shaped, drilled, woven

Working mode: continuous filtration, backwashing without interruption

Scope of application: Cooling towers, steel plants, electricity, paper mills, food processing plants, chemical, plastic, mining, agricultural irrigation, etc

Dimensions and Technical Parameters