Yuyi high-precision 2-ton weighing scale

Product Introduction

Yuyi high-precision 2-ton weighing scaleAlso known as single-layer platform scale, it has a simple structure and a reasonable platform design. High cost-effectiveness, simple design structure, and easy operation. Scale platform: With a brand new structural design, it has increased rigidity, strength, and lifespan. All components undergo strict manufacturing and inspection before leaving the factory to ensure consistent high quality, thereby ensuring stable and reliable measurement accuracy and repeatability.

Yuyi high-precision 2-ton weighing scaleFunction:

Frameless, low table top, U-shaped beam structure, flower steel plate

Material: Carbon steel tabletop 5mm scale frame structure: Made of 25 gauge U-shaped steel, mainly overloaded to 150% weight

The surface of the carbon steel weighing platform has been sandblasted and treated with acrylic paint

The protected load-bearing activity can adjust the rotating feet and has lower requirements for the ground

Equipped with four alloy steel or stainless steel weighing sensors

Product specifications and parameters:

Standard range: 0.5T 1T 2T 3T 5T 10T

Standard sizes: 0.8m x 1.0m, 1.0m x 1.0m, 1.2m x 1.2m, 1.2m x 1.5m, 1.5m x 1.5m, 1.5m x 2m, 2m x 3.0m

CCS-1T/2T/3T

Precautions

1. This product cannot be overloaded and should be weighed separately. Pay attention to the humidity and powder layer in the operating environment;

2. It is prohibited to perform arc welding operations on the weighing platform. If arc welding operations must be performed on the weighing platform. Please note: Disconnect the signal cable from the weighing display controller; The grounding wire for arc welding must be set near the welded area and firmly in contact with the scale body. Sensors must not be used as part of the arc welding circuit;

3. Maintain good weighing habits during use. During the weighing process, try to place the goods in the middle position of the electronic weighing scale, so that the four sensors of the weighing scale can balance the force. Do not frequently weigh in one corner for the sake of convenience, which may cause uneven force on the sensor and affect the service life of the electronic weighing scale;

4. When the weighing display controller is not used for a long time (such as more than a month), it should be powered on and checked according to environmental conditions to avoid moisture or other adverse gas erosion that affects reliability; Electronic buffering should not be left in outdoor environments for too long, especially not exposed to rain; Maintain a dry operating environment;

5. No inductive loads, such as doorbells, shall be connected to the same phase line of the electronic weighing scale;

6. Avoid getting close to heat and vibration during the use of electronic weighing scales;

7

2、 After sales service

1. The free warranty period for the product is one year for products purchased from our company, with lifetime maintenance services provided

2. During the warranty period, we will provide full technical tracking, actively offer technical consultation and calibration services.

3. If the product malfunctions, we promise to provide a 24-hour response. All required replacement parts are replaced on site, allowing customers to rest assured during repairs.

4. If it cannot be repaired on site in a timely manner, our company will provide free substitute scales for customers to use.

5. Beyond the warranty period: Provide lifelong maintenance services. Provide accessories at cost price.