Zhenjiang polyurethane insulation pipe

These properties make rubber insulation materials an ideal insulation material for protecting pipelines, preventing them from being corroded by atmospheric media or industrial environments. Zhenjiang steel sleeve steam insulation pipe, prefabricated direct burial

Rubber insulation pipes are often used by people, and they can be applied in many fields because the materials used to make them are outstanding, flexible, and have a good appearance. For example, many of the manufacturing technologies are imported from foreign countries, and they are made of materials that prevent explosions. People can use them easily, and they are also very safe. This is why this type of rubber insulation material is used in so many advanced fields.Zhenjiang steel sleeve steam insulation pipe, prefabricated direct burial

1. Shake the container before use to shake the glue evenly. During actual installation, use a small can of glue to prevent it from evaporating too quickly. If necessary, pour the large can into the small can and seal the can mouth when not in use.

2. Use a short and hard brush.

3. Apply a thin and uniform layer of adhesive to the bonding surfaces at both ends of the material.

4. The natural drying time of rubber insulation material adhesive is 3-10 minutes, depending on the grade of adhesive, atmospheric temperature and humidity. Exposure time exceeding 20 minutes is invalid.

5. When using, wait for the glue to dry naturally. The correct method for measuring dryness is to touch the adhesive surface with your fingers. If your fingers do not stick to the surface of the material and there is no sticky feeling on the material surface, you can proceed with the bonding.

6. When bonding, simply align and grip the two surfaces of the adhesive interface for a while.

7. If the placement time is too long, resulting in the two joint surfaces not being sticky when pressed together, please repeat steps 2-6.

8. Normally, each kilogram of rubber adhesive can be applied to two square meters of bonding surface.

9. Usually, glue cannot be used below 5 ℃. When working in an environment of 5 ℃ -10 ℃, please place the glue indoors at a temperature of 20 ℃ and remove it when needed.

10. When connecting two materials under pressure, there is no need to wait for the glue to dry. The wet bonding method is used. First, place the materials at the installation site, apply glue to the interface of the materials, adjust the position of the two materials correctly, and soon they will be firmly bonded according to your designed position.

11. Check if the adhesive and anti rust paint protecting the iron pipe are firmly bonded.Zhenjiang steel sleeve steam insulation pipe, prefabricated direct burial