pipeline network

GR-9130 Pipeline Water Quality Monitoring System

1Introduction to the functions of the instrument

The pipeline monitoring system is an online water quality monitoring system that monitors parameters such as pH, residual chlorine, turbidity, and temperature of pipeline water. This pipeline monitoring system can be installed at outdoor pipeline nodes to continuously monitor various parameters of pipeline water, save the monitored data in real time, and send the monitored data to the central control room in real time through a parallel network. Through this system, relevant departments can timely understand the water quality of the pipeline network, detect pipeline faults, improve maintenance efficiency, reduce losses, ensure the quality of water transmission and supply, scientifically warn and improve efficiency.

2、 The role of instruments in pipeline networks

Tap water flows from the source through various pipe networks and then to the faucet (user). The water flowing out from the source (water company) is tested and qualified, but after passing through the huge pipe network system, due to pipeline damage, aging, or the invasion of foreign toxic substances, the level and safety of the water flowing to the faucet (user) cannot be guaranteed. This pipe network integrated system can be deployed in the pipe network to monitor the water quality in real-time and provide feedback to relevant departments to ensure the water quality safety from the source to the faucet.

3、 Key technical parameters of the instrument

turbidity

Principles of Measurement Optics

Online real-time monitoring of work mode

Measurement range: 0~100NTU

Resolution 0.001NTU

2% accuracy reading

Flow rate 250ml/min~500ml/mi

PH

Determination principle potential method

Online real-time monitoring of work mode

Measurement range 0~14

Resolution 0.01

Accuracy 0.01

Integrated temperature sensor 0~100 ℃

Working pressure 0~10bar

Flow rate of 0.01m/s~3m/s

residual chlorine

Determination principle Amperometric titration method

Online real-time monitoring of work mode

Measurement range: 0~20mg/l FCL

Resolution 0.001mg/l

Response time 2 minutes

Working pressure: 0~1 bar

Flow rate 30L/h~110L/h

system

Power supply 220V 50HZ

Power 100W

Working temperature 0-50 ℃

Communication method RS232/485, Ethernet, GPRS， SMS, etc

Weight 100KG

4、 Main application scope

1. Application of water quality monitoring and safety warning in pipeline network

By real-time monitoring of the pH value, residual chlorine, and turbidity of tap water in the pipeline network, and sending the monitoring data wirelessly via GPRS to the relevant departments of the water plant, the water plant can grasp the water quality of the pipeline network in real time and make relevant adjustments accordingly.

2Water quality testing of campus water supply system

This instrument can be installed in the campus water supply network to detect the water quality inside the campus and ensure the safety of students' drinking water.

3Water quality testing of self supplied water system

In areas in the west where there are no large water companies, it is common to build their own water supply systems. This integrated pipe network system can be used to monitor the water quality safety of the self supplied water system.