OnePerformance Introduction

The desulfurization tower packing produced by our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province), XA-1 light ceramic multi tooth ring packing, light ceramic plum blossom ring (hereinafter referred to as light ceramic packing), is made of refractory clay raw materials and processed by a series of excellent processes such as formula batching, refined mud material, mold optimization design, extrusion molding, drying, firing, and domestic manufacturing equipment. The product has excellent quality, uniform color, and a regular appearance without burrs.

Light ceramic fillers are widely used in gas plants, coking plants, fertilizer plants for washing naphthalene, benzene, desulfurization, decarbonization, and hot water saturation towers, as well as in direct cooling towers, all of which have achieved excellent results.

　　IIPacking for desulfurization tower: XA-1 light ceramic multi tooth ring packing. Performance characteristics of light ceramic plum blossom ring:

1. The novel structure and patterned structure make the gaps evenly distributed and aesthetically pleasing. The shape of the light ceramic filler is a regular hexagon, suitable for installation in equipment with different diameters and circular cross-sections (this filler can be cut into any shape to fill the gaps in the tower wall, and the six corners are all 1200, which is very sturdy and not easily broken during transportation and installation) And the utilization of the entire filling plane, other regular fillers cannot be cut, and there are inevitably cavities of different sizes around the tower, with serious wall and groove flow phenomena, which will affect the use effect to varying degrees; There are six isolation columns (15-20mm high) at the bottom of the packing material. After filling, maintain a certain distance between the upper and lower layers of packing material. Therefore, the liquid forms a large number of droplets at the bottom layer of the packing, forming a mass transfer surface; When installing, the orientation of adjacent layers of packing should be staggered by 300, which can continuously change the direction of gas flow from bottom to top, increase agitation, promote uniform distribution, and enhance the mass transfer process.

2. Light ceramic fillers have high strength and a compressive strength greater than 15MPa at room temperature.

3. The surface of the light ceramic filler is rough and porous, with good wetting and wetting properties for liquids. It can retain a layer of liquid film on the surface of the filler, providing conditions for gas-liquid mass transfer.

4. Packing for desulfurization tower: XA-1 light ceramic multi tooth ring packing. Light ceramic plum blossom ring packing is lighter in weight and has lower resistance. The density of the product is 1.03g/cm3, and the bulk density is 0.35-0.42g/cm3, which is much lower than the density and bulk density of all ceramic fillers and metal fillers, thus having the advantage of lightweight operation. As a regular packing material, light ceramic packing has a dry tower resistance of less than 50 millimeters of water column and an operating resistance of less than 100 millimeters of water column in a naphthalene washing tower with a gas flux of 50000 cubic meters per hour, which makes it less likely to cause blockage and overcomes the disadvantages of loose packing material being prone to breakage and blockage.

5. The desulfurization tower packing produced by our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province) is XA-1 light ceramic multi tooth ring packing. The light ceramic plum blossom ring has a large mass transfer coefficient and effective area. The measurement of the performance of porous fillers by Tianjin University shows that the mass transfer coefficient of lightweight ceramic fillers is 2.2 times that of all ceramic fillers. After filling, only 6 adjacent support legs overlap to form an ineffective area, and the form of gas-liquid transmission is' surface 'contact. In addition, the porous packing system is a microporous honeycomb ceramic with microporous area and spatial droplet area, which makes the effective area of the porous packing greater than 99.5% and achieves separation and purification effect.

6. Our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province) produces XA-1 light ceramic multi tooth ring packing for desulfurization towers. The light ceramic plum blossom ring packing has strong aging resistance, corrosion resistance, and long service life: the product has an acid resistance of over 98%. The alkali resistance is greater than 88%.