The production standards for aluminum silicate insulation cotton are relatively strict because it is mostly used in high temperature or high current intensity areas, so the quality of the products produced should be superior. Generally speaking, aluminum silicate insulation cotton, as a thermal insulation product, has a long service life, but it will eventually expire. This product is an insulation material that integrates a closed microporous structure and a mesh fiber structure. Within the temperature range of use, it can be used for a long time, is not easily aged, does not deteriorate, is non-toxic and odorless, and its insulation performance remains unchanged for a long time. It has the characteristics of light weight, low thermal conductivity, cold insulation, heat insulation, shock resistance, and sound absorption. Next, let's talk about the three major characteristics of aluminum silicate insulation cotton

1. Green and harmless

Aluminum silicate composite insulation coating is a new type of green coatinginorganic coatingIt is a single component material packaging, non-toxic and harmless, with excellent sound absorption, high temperature resistance, water resistance, frost resistance, low shrinkage rate, seamless overall, no cold bridge, and hot bridge formation. It has stable and reliable quality, crack resistance, good seismic performance, strong resistance to negative wind pressure, light bulk density, good insulation performance and good workability, water retention, strong adhesion, no hollowing of the surface layer, no sagging during construction, no sagging during construction, reduced construction consumption, and combustion performance. Non combustible material: rapid cooling and heating within the temperature range of -40-800 ℃, the insulation layer does not crack, fall off, burn, and is resistant to acid, alkali, oil, etc

2. Water absorbing and flame retardant

It makes up for the problems of high water absorption, aging and volume shrinkage in traditional wall insulation coatings, which can easily cause low strength and hollow cracking in the later stage of the product, and reduce the performance of insulation coatings. At the same time, it also makes up for the defects of polystyrene particle insulation coatings, such as flammability, poor fire resistance, high temperature production of harmful gases, low weather resistance, and high rebound elasticity. Aluminum silicate composite insulation coating is the insulation coating with the highest safety factor, ideal comprehensive performance and construction performance among wall insulation materials. It can be applied with economical thickness according to different medium temperatures, and its cost-effectiveness is much better than that of materials with the same performance.

3. Sealed firmly

Stable molding, strong adhesion, easy and fast construction, can effectively shorten the construction period, and is not limited by the geometric shape of the insulated body. It is particularly suitable for internal and external wall insulation, central air conditioning lower air supply systems, and opposite surface insulation, which can prevent energy loss caused by traditional material gap leakage and form an overall seal. The product complies with the GB/T20473-2006 standard for building insulation mortar and meets national fire and environmental protection requirements.