02,05,2026 16 views
Food is a necessity in our daily lives. Perhaps many people may not know that high-pressure cleaning machines play an important role in the food processing. But why do you say that? Below we will introduce the specific application of high-pressure cleaning machines in food processing.High pressure cleaning machine manufacturer
There are two types of high-pressure cleaning machines: hot water and cold water. Generally, the pressure of the hot water high-pressure cleaning machine we commonly use is not higher than 250 bar. Hot water high-pressure cleaning machines are mainly used to clean difficult to clean dirt. Hot water high-pressure cleaning machines use expansion pipes for heating. When water passes through the expansion pipes, the pressure of the expansion pipes will be relatively high. If the bearing capacity of the expansion pipes does not increase, the pressure of the hot water high-pressure cleaning machine will not increase. But if the pressure on the expansion tube increases, the cost will also increase. So the working pressure of a hot water high-pressure cleaning machine will be around 200BAR. When high pressure is needed, a high-pressure cold water cleaning machine is usually used to achieve the cleaning effect based on its working pressure.
Using a high-pressure cleaning machine for high-pressure water jet cleaning can not only remove grease from barrels, mixing tanks, conveyor belts, evaporators, and heat exchangers, but also clean the dirt and residue present on them. After processing the food processing equipment in this way, its processing capacity will not be affected, thereby improving the production efficiency of the food processing plant. The high-pressure water jet pressure required for cleaning the food processing equipment is usually between 350-700 bar. Regular use of high-pressure cleaning machines for equipment maintenance not only provides us with stable food production, but also guarantees the healthy development of the national economy.
During the use of high-pressure cleaning machines, we may encounter some common malfunctions. So, what are the reasons for these malfunctions?
*Common malfunction: When the power switch of the high-pressure cleaning machine is turned on, although the machine has high voltage output, the cleaning effect is not very good. The reasons for this phenomenon are likely to be: the liquid temperature in the cleaning tank is too high, the selection of cleaning solution is inappropriate, the high-pressure frequency coordination is not adjusted properly, and the cleaning solution level in the cleaning tank is inappropriate.
The second common fault is that the DC fuse DCFU of the high-voltage cleaning machine is blown. The cause of this malfunction is likely due to the burning of the rectifier bridge stack or power transistor, or due to a faulty transducer.
The third common fault: When the power switch of the high-pressure cleaning machine is turned on, although the indicator light is on, the high voltage is not output. There are many factors that can cause this malfunction, including: the DCFU fuse is blown; Transformer malfunction; The connection plug between the transducer and the high-voltage power board is loose; Ultrasonic power generator malfunction.
The fourth common fault: When the power switch of the high-pressure cleaning machine is turned on, the indicator light does not light up. The cause of this malfunction is likely to be a blown fuse ACFU or a damaged power switch without power input.
