101-1A-2A-3A-4A electric blast drying oven

101-1A-2A-3A-4A electric blast drying oven is a series of equipment suitable for drying, baking, heat treatment and other purposes in laboratories of industrial and mining enterprises, colleges and universities, scientific research, medicine and health institutions.

　　101-1A-2A-3A-4A electric blast drying ovenIt is a series of equipment suitable for drying, baking, heat treatment and other purposes in laboratories of industrial and mining enterprises, colleges and universities, scientific research, medicine and health units. The following is a specific introduction to these models of electric blast drying ovens:

1、 Common characteristics

1. Temperature range: The working temperature of these drying ovens can range from room temperature+5 ℃ to the peak temperature (usually 300 ℃). Users can choose the working temperature within this range as needed and achieve constant temperature through the automatic control system inside the oven.

2. Temperature control method: Electronic or digital temperature controllers are used for temperature control, which is flexible, accurate, clear and intuitive.

3. Structural features:

-The drying oven is composed of thin steel plates, and glass fiber is used as insulation material between the working chamber and the outer shell of the box.

-There is a glass window in the middle of the box door for easy observation of the situation inside the studio.

-Equipped with an electric blower, it promotes mechanical convection of indoor hot air, making the indoor temperature more uniform.

-All electrical operating equipment is installed in the control layer on the box side, with side doors that can be removed for inspection or repair of circuits.

4. Safety and maintenance:

-Before powering on, check the electrical performance and pay attention to whether there is any open circuit or leakage.

-Flammable and volatile substances are strictly prohibited from being placed inside the drying oven to prevent explosions.

-Regularly check whether the wiring of each part is loose, whether the contacts of the AC contactor are in good condition, and promptly repair any faults that occur.

2、 Specific parameters of each model

1.101-1A 型

-Working voltage: 220V

-Power: 1.8KW

-Working size: 350 * 450 * 450mm

-Dimensions: 500 × 810 × 813mm

-Inner liner material: Galvanized sheet (Type A)

2.101-2A 型

-Working voltage: 220V

-Power: 3.2KW

-Working size: 450 * 550 * 550mm

-Dimensions: 600 × 910 × 913mm

-Inner liner material: Galvanized sheet (Type A)

3.101-3A 型

-Working voltage: 220V

-Power: 4KW (some information mentions 3.2KW, specific subject to actual product)

-Working size: 500 * 600 * 750mm

-Dimensions: 650 × 960 × 1113mm

-Inner liner material: Galvanized sheet (Type A)

4.101-4A 型

-Working voltage: 380V

-Power: 9KW

-Working size: 800 * 800 * 1000mm

-Dimensions: 1000 × 1170 × 1580mm

-Inner liner material: Galvanized sheet (Type A), but it should be noted that different brands and models may offer stainless steel inner liner options (such as SB type)