120bar pipeline type reverse osmosis membrane

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

120bar pipeline type reverse osmosis membrane pipeline type reverse osmosis membrane module parameters $n1, membrane core model: STRO-8042-B $n2, membrane material: polyamide PA $n3, single membrane module area: 30m $n4、 Membrane core standard desalination rate (NaCl): 99.5%

Product Details

The STRO-HP8042 series of pipe network reverse osmosis includes standard length membrane cores, high-pressure end plates at both ends, fiberglass membrane shells, and integrated membrane components. It has the characteristics of high precision, anti pollution, high flux, and good cleaning and recovery. It is a reliable product for customers in garbage leachate treatment and concentrated salt water operation.

The STRO-HP8042 series of pipe network membrane components are standard and compatible with similar models of pipe network membrane components on the market. They can be designed in a standardized manner to improve efficiency.

120bar pipeline type reverse osmosis membraneparameter

Project Item	Technical Parameters
Membrane module model	STRO-HP8042
influent flow rate	8–12m³/h
water production flow	200-450L/h
High operating temperature	30°C @90bar
High operating pressure	120bar
Normal operating pressure	60-110bar
total length	1415mm
external dimensions	224mm
internal dimensions	202mm
Water inlet interface	1 'Copy Forest
Concentrated water interface	1 'Copy Forest
Single membrane area	30m²
Net weight of membrane components	66kg
Operating weight of membrane components	74kg
Suitable for raw water conductivity	60-120ms/cm
Normal transmembrane pressure difference	0.5-0.7bar

Pipeline type reverse osmosis membrane module

Membrane core model: STRO-8042-B

Membrane material: Polyamide PA

Single membrane module area: 30m ²

Membrane core standard desalination rate (NaCl): 99.5%

120bar pipeline type reverse osmosis membranePrecautions for using pipeline type reverse osmosis membrane components:

1. Operating temperature:<40°C@90bar，<30°C@120bar；

2. Pressure drop:<0.7bar；

3. Free chlorine tolerance:<0.1 ppm;

4. PH range, continuous operation: 3-10;

5. PH range, short-term cleaning (30 min.): 2-12;

6. Regularly tighten the locking nut of the disc tube membrane component with a torque of 50NM, on a weekly and monthly basis;

7. During the startup process, there will be a large number of bubbles in the membrane module. It is necessary to use a flushing method to exhaust the gas inside the membrane module before starting up to avoid damage to the membrane;

8. To avoid sudden changes in pressure or water volume during the start stop process, which can cause water hammer, a control program can be used to achieve slow start stop and prolong the membrane life;

9. Short term shutdown, can be cleaned and protected with non oxidizing bactericides to avoid bacterial growth in membrane components;