2B Model 410 Nitric Oxide Detector from the United States

2B Model from the United States

The 410 nitric oxide detector is designed to measure the concentration distribution of nitric oxide (NO) in the atmosphere. This product is currently the first product with a small volume, light weight, and detection accuracy of PPb level.

Product Introduction of 2B Model 410 Nitric Oxide Detector in the United States:

The nitric oxide detector of Model 410 is designed to measure the concentration distribution of nitric oxide (NO) in the atmosphere.

Range 0-2000 ppb (0-2 parts per million) with a precision of ± 1.5%

ppb。 When used in combination with the 401 nitrogen dioxide converter, nitrogen oxides and nitrogen dioxide (using different methods) can be measured simultaneously. The detection principle of model 410 is based on the selective reaction of nitric oxide and ozone. The measurement of ozone depletion resulting from this is based on the UV absorbance of the method, which only requires rare calibration. Compared to other instruments, nitrogen oxide chemiluminescence instruments require almost continuous calibration using a standard gas.

Product specifications for 2B Model 410 nitric oxide detector in the United States:

Model

The 410 nitric oxide detector is currently a very small, lightweight, and low-power ppb level measuring instrument for nitric oxide. Combined with the 401 type nitrogen dioxide detector, it can measure nitrogen oxides and nitrogen dioxide (with different operations), which are competitive tools with the same size, weight, and power consumption advantages.

Technical parameters of 2B Model 410 nitric oxide detector in the United States:

Ozone depletion titration of nitric oxide detected by UV absorption ozone at 254 nm

Precision and accuracy: greater than 1.5 ppb or 2% of the reading

Data storage: 14336 lines (10 seconds average=1.4 days, 5 minutes average=1.4 months)

Time/Measurement: 10 seconds (Data Average Selection: 10 seconds, 1 minute, 5 minutes, 1 hour)

Sampling flow rate: 1 liter/minute

Data output: RS-232, LCD, analog 0-2.5 V, 4-20mA optional, flash card optional

Power requirements

Typical: 11.4W