32A Micro disconnect Three proof Circuit Breaker

Scope of application:32A Micro disconnect Three proof Circuit Breaker
Environmental temperature -25 ℃ 55 ℃;
The installation height shall not exceed 2000m above sea level;
Strong acid, strong alkali, salt, ammonia, chloride ion corrosion, environments with high water, dust, and humidity;
Widely used in factories and enterprises such as petroleum, chemical, port, food, pharmaceutical, etc;

Product Features:
The shell is made of glass fiber reinforced unsaturated polyester resin material, which is molded and has a beautiful appearance. It has the advantages of anti-aging, non deformation, impact resistance, anti-static, corrosion resistance, etc;
This product is resistant to strong acid, strong alkali, salt, seawater, and chloride ion corrosion;
This series of products features a Mi Palace style waterproof structure with excellent waterproof and dustproof performance;
All exposed fasteners are made of stainless steel, and the sealing is made of silicone rubber, which is resistant to oil, acid, alkali, and high temperature;
The internal components are C65 high breaking small circuit breakers;
The normal supply direction for the incoming and outgoing lines of this series of products is bottom in and bottom out, and special requirements should be specified when ordering;

Technical Specifications:
Rated voltage: 220V/380V
Rated current: 1A, 3A, 6A, 10A, 16A, 20A, 2, 32A, 40A, 50A, 63A
Protection, etc.: IP65
Corrosion prevention, etc.: WF2
Cable outer diameter: suitable for cables ranging from 12mm to 17mm, and suitable for cables ranging from 22mm to 32mm
Internal components: circuit breaker, Schneider C65 series miniature circuit breaker
Numbers: 1P, 2P, 3P, 4P, 1PL, 2PL, 3PL, 4PL

Usage and maintenance:32A Micro disconnect Three proof Circuit Breaker
1. Install and fix the circuit breaker, open the cover, connect the cable through the introduction device, check for errors, close the cover, fasten with fasteners, and tighten the compression nut to seal the cable. After completion, it can be used.
Circuit breakers must not be disassembled at will. During maintenance, the front power supply must be disconnected before opening the cover for repair. The sealing components must not be damaged during maintenance. After maintenance, the cover must be closed and fastened with bolts before use.
3. Seals should be regularly inspected and replaced, and wiped with a damp cloth during cleaning.
4. User Notice: Outdoor products must be equipped with shading facilities to prevent rainwater from entering the product.