FZC-A4D4L waterproof, dustproof and anti-corrosion operation column

Scope of ApplicationFZC-A4D4LWaterproof, dustproof, anti-corrosion operation column
1. Environmental temperature -25 ° C to 55 ° C
2. Installation height not exceeding 2000m above sea level
3. Suitable for environments with strong acid, strong alkali, salt, ammonia, chloride ion corrosion, high water, high dust, and humidity
4. Suitable for places such as petroleum, chemical, port, food, medicine, etc
5. Used in electrical control systems as a command to send
6. This product has various solutions and can be produced according to the electrical system diagram provided by the user

Product Features
1. The shell is made of glass fiber reinforced unsaturated polyester resin, which has excellent properties such as beautiful appearance, corrosion resistance, anti-static, impact resistance, and good thermal stability
2. The stainless steel shell is welded with stainless steel plates and polished on the surface, making it beautiful and elegant
3. The aluminum shell is formed by aluminum alloy die-casting, and the surface powder is electrostatically sprayed with plastic
4. The L series products are resistant to strong acids, strong alkalis, salts, and anti-corrosion with WF1
5. The G and S series products are more resistant to strong acids, alkalis, salts, and corrosion, and are WF2
6. The L and S series products have a labyrinth sealing structure, while the G series products have a curved sealing structure. Both sealing structures have good waterproof and dustproof performance, with protection of IP65
7. All exposed fasteners are made of stainless steel, and the seals are made of silicone rubber, which is oil resistant, acid resistant, alkali resistant and anti-aging
8. This series of products is suitable for control circuits with AC 50Hz, voltage below 380V, DC below 440V, and current within 10A. It is used for starting and stopping, control conversion, signal switching, and instrument measurement display of electric motors in work sites
9. Equipped with indicator lights, buttons, conversion switches, ammeters, voltmeters, etc., other instruments can be installed according to user requirements
10. Can achieve arbitrary sum of various components to meet user design requirements
11. More than 30 functions of the switch, users can choose according to their requirements
12. This product generally uses cable wiring. If steel pipe wiring is required, please specify separately

Main technical parameters
1. Rated voltage: AC 220V/380V
2. Rated current: 10A
3. Usage category: AC-14, DC13
4. Protection, etc.: IP65
5. Corrosion prevention, etc.: WF1, WF2
6. Inlet specification: G3/4 '
7. Applicable cable outer diameter: φ 9mm - φ 14mm
8. Inlet direction: lower inlet, upper inlet, rear inlet

Selection GuideFZC-A4D4LWaterproof, dustproof, anti-corrosion operation column
LB (C) Z850- Waterproof, Dustproof, and Anti Corrosion Operating Column
X-S: Engineering plastic shell (optional); G: Stainless steel casing; L: Aluminum alloy shell
AX - Number of buttons (not specified if not needed)
BX - Number of electricity meters (not specified if not included)
DX - Number of indicator lights (not specified if not included)
KX - Number of switches (not specified if not included)
PX - Number of potentiometers (not specified if not included)
X - Installation method (G: hanging type; L: Vertical)
X - Inlet direction (X: Lower inlet (optional); D: Upward line; B: Rear Line)
X (X) - Number of inlet ports (thread specification)
Note:
1. This product can be used indoors or outdoors
2. The standard format for ordering this product is:
LB(C)Z8050-AXBXDXKXXXX
AX-XXX/... (see E24)
BX-XX (X)/... (see E29)
DX-XX (X)/... (see E23)
KX-XX/... (see E25-E28)
The factory nameplate only reflects the type and quantity of components, and the specific specifications of the components are only used as ordering parameters.
Example of ordering: If you need to order LB (C) Z8050 series waterproof, dustproof, anti-corrosion operating column, engineering plastic shell, equipped with two buttons, two lights, and one switch, hanging installation, where the button contact specifications are one normally open and one normally closed, one button head is a red mushroom shaped button, and the other is a green standard button; The indicator lights are one red and one green for AC 220V; If the switch code is M, the ordering model is:
LB(C)Z8050-A2D2K1G
A2-1mR(急停)/1G
D2-1R(AC220)/1G(AC220)
K1-1M