6-Circuit Waterproof, Dustproof, and Anti Corrosion Distribution Box

There are three types of materials for the three proof and explosion-proof distribution box: engineering plastic, welded steel plate, and stainless steel. The commonly used material is engineering plastic shell. Large boxes and those with special external dimensions are generally made of welded steel plates or stainless steel materials, and the price is much higher than that of aluminum alloy materials. Explosion proof and anti-corrosion distribution boxes are mostly made of engineering plastics and stainless steel materials.
The significance of three defenses: waterproof, dustproof, and anti-corrosion. This series of products is suitable for use in circuits with a communication frequency of 50Hz, voltage of 380V and below, DC of 440 and below, and current of 100A or below. It is used for lighting control, power transmission, and other effects in work sites.
1. Altitude not exceeding 2000 meters;
2. The ambient air temperature shall not be higher than+55 ℃ and not lower than -25 ℃;
3. Strong acid, strong alkali, salt, ammonia, chloride ion corrosion, environments with high water, dust, and humidity.
4. Indoor or outdoor application places without obvious shaking and severe impact oscillation.

Technical Specifications6-Circuit Waterproof, Dustproof, and Anti Corrosion Distribution Box
Extra voltage (V): 220V/380V
Extra current (A): 10A-21
Protection, etc.: IP65
Shell material: Engineering plastic
Corrosion prevention, etc.: WF2
Installation method: wall mounted/vertical
Product model: Non standard customization

Product features
1. This series of products is equipped with high breaking miniature circuit breakers such as iC65, C120H, S200, AEG, GV2 motor protector, NSX, CVS, S/T series (ABB), CM1 and other molded case circuit breakers and signal lights, which can be customized according to the drawing requirements;
2. The engineering plastic shell is made of glass fiber reinforced unsaturated polyester resin material, which is limited by molds and has a beautiful appearance. It has the advantages of anti-aging, non deformation, impact resistance, anti-static, corrosion resistance, etc.
3. The engineering plastic shell is F2 resistant to strong acid, strong alkali, salt, seawater, ammonia, chloride ion corrosion, and anti-corrosion. The product is of labyrinth waterproof structure. The sealing strip is made of silicone rubber that is acid resistant, alkali resistant, salt resistant, oil resistant, high temperature resistant, and anti-aging, and has outstanding waterproof, dust resistant, anti-corrosion properties. The protection is IP65.
4. According to requirements, it can be equipped with leakage protection. If there are special needs, it can be customized.

Ordering Instructions
1. When placing an order, the user must specify the number of circuits in the distribution box, the corresponding current for each circuit, and the number of circuit breakers, etc.
2. Provide electrical system diagrams when necessary.
2. Please provide written explanations for any special requirements.

Device and protection6-Circuit Waterproof, Dustproof, and Anti Corrosion Distribution Box
1. When installing, the cable should be threaded through the sealing ring and tightened with washers and compression nuts to ensure that the seal and cable are not loose;
2. Regularly check that all fasteners are not loose and keep the surface clean;
3. Non personnel are not allowed to open the cover;
4. During installation and repair, the front power supply must be blocked first;
5. The grounding must be securely connected.