-
E-mail
kandy-ai@hn-jcm.com
-
Phone
15325713979
-
Address
No. 188 Nanhuashan Road, Si'an Town, Changxing County, Huzhou City, Zhejiang Province (Production Base)
Product Categories
Hangzhou Haina Environmental Protection Technology Co., Ltd
4040 reverse osmosis membrane
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 4040 reverse osmosis membrane is made up of multiple layers of membranes, diversion nets, and partition nets wound around the central water production pipe in a spiral manner. With standardized dimensions, flexible parallel scalability, and moderate water production capacity, it has become the core component of small and medium-sized industrial water treatment systems.
Product Details
4040 reverse osmosis membraneMainly targeting groundwater, surface water, lightly polluted industrial wastewater, rivers and lakes. LP type reverse osmosis membrane has the characteristics of wide applicability in water quality and pressure, and can be used for ultra pure water in the electronic industry, boiler feedwater in power plants, industrial water treatment fields such as food and beverage, electronics, and medicine.
Product advantages:
Low operating energy consumption and high economic benefits
The roll film technology enhances the structure of membrane components to reduce organic pollution and blockage
Chemical cleaning has good recovery performance and reduces cleaning frequency
● Can adapt to the water quality conditions and temperature environment in most regions
Performance parameters:
| performance parameters | model | Average water production m ³/d (gpd) | stable desalination rate | Low desalination rate | Effective membrane area m2 (ft2) | Inlet grid |
| PLUS-4040-LP | 10.2(2,700) | 99.7 | 99.3 | 8.7(94) | 28 | |
| MAX-4040-LP | 12.1(3,200) | 99.6 | 99.3 | 8.7(94) | 28 | |
| test conditions | 2000ppm NaCl aqueous solution, pressure 225psi (1.55MPa), temperature 25 ℃, pH 7-8, recovery rate 15% | |||||
4040 Reverse Osmosis Membrane Description:
The flow rate of a single membrane element may vary, but the range of variation will not exceed ± 15%;
The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.
Core application scenarios:
Small and medium-sized commercial water treatment
Hotel/school direct drinking water system, beverage plant process water, and small boiler supply water.
● Industrial wastewater reuse
Advanced treatment of electroplating wastewater and printing and dyeing wastewater to achieve water resource recycling.
● Desalination of brackish water
Desalination of groundwater sources with TDS ≤ 10000 ppm can produce water that meets drinking water standards.
Pre desalination treatment
As a pre process for EDI (Electrodeionization) or mixed bed, it reduces the subsequent processing load.
