9-35 high temperature centrifugal fan

The 9-35 high-temperature centrifugal fan drum induced draft fan series (including 9-35, 8-39 series) uses manganese steel to make the wind turbine, and the transmission group adopts water-cooled oil cooling design, which can withstand high temperatures of 300 degrees. The speed ranges from 1450 to 2900 revolutions per minute, and there are many high-pressure designs available. Suitable for the building materials and chemical industry. The overall structure is beautiful and easy to install and use.

The impeller of the 9-35 high-temperature centrifugal fan drum induced draft fan is made of stainless steel, the casing is made of 16Mn appropriately thickened steel plate thickness, the bearings are used, and the fan is designed for an intake temperature of 250-400 degrees

Installation and use of 9-35 high-temperature centrifugal fan and induced draft fan:

Before installation: The various components of the high-temperature centrifugal fan should be inspected for completeness, consistency between the rotation direction of the impeller and the casing, tightness of the connections between each part, and damage to the main components such as the impeller, main shaft, and bearings. Whether the transmission group is flexible, etc.

During installation: Pay attention to checking the casing. There should be no tools or debris falling into the casing. In order to prevent rust and reduce disassembly difficulties, a layer of lubricating oil or mechanical oil should be applied to some joint surfaces. The joint surface between the fan and the foundation, as well as the connection surface between the fan and the inlet and outlet air ducts, should be adjusted to fit naturally. Forced connections are not allowed, and the weight of the ducts should not be added to the various components of the fan. Attention should also be paid to the horizontal position of the fan.