Hot air stove high-temperature fan

NegotiableUpdate on 02/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-temperature fan of the hot blast stove is mainly made of materials, and the main shaft of the motor and the impeller are directly driven. It can be used for continuous operation in hot air below 800 ℃ without deformation and temperature resistance. It does not require any cooling liquid below 300 ℃ and uses a sealed water-cooled motor above 300 ℃ to withstand the furnace temperature of 950 ℃. It has the advantages of easy installation, convenient maintenance, and long service life.

Product Details

Hot blast stove high-temperature fan is a new type of fan with wide applications and low power in China's current heat treatment industry. The fan is mainly made of materials, and the main shaft of the motor and the impeller are directly driven. It can operate continuously in hot air below 800 ℃ without deformation. It is a temperature resistant motor, and does not require any cooling liquid below 300 ℃. It uses a sealed water-cooled motor above 300 ℃ and can withstand high furnace temperatures of 950 ℃. It has the advantages of easy installation, convenient maintenance, and long service life.

Widely used for small boiler induced draft and dust exhaust induced draft The operation of the fan increases the firepower and draws out the flue gas from the boiler. There are fixing screws on the upper motor side. Remove the screws and connect the motor leaf. Remove all the connecting plates for repair, flange installation, and straight mouth installation The fan can operate continuously for a long time, and it is not related to the motor or induced draft. Because the impeller in the fan has a slope, dust cannot accumulate on the impeller. The fan transports hot air at a high temperature of 150-300 degrees Celsius.