AT series pneumatic actuator

NegotiableUpdate on 01/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Torque range: 10-10000NM Travel range: 0-90 degrees Protection level: IP67 Control mode: double acting, single acting normally closed, single acting normally open Structural mode: gear rack piston type Valve: butterfly valve, ball valve, air valve Surface treatment: hard oxygen anodizing Accessories: solenoid valve, air filter pressure reducing valve, feedback device, handwheel, electrical locator

Product Details

Overview of AT series pneumatic actuator products

The AT new gear rack pneumatic actuator is innovatively optimized through CAD three-dimensional modeling, with a beautiful, compact, and modern appearance; And adopt practical new materials and new processes to make the quality and performance of the product more reliable; Multi specification selection is more cost-effective; The product fully complies with international standard technical specifications and meets current and future needs.

Characteristics of AT series pneumatic actuator products

1. The gear rack dual piston symmetrical structure design ensures fast and stable movement, high precision, and high output power. By simply changing the piston assembly position, reverse rotation can be achieved.

2. The extruded high-quality aluminum alloy cylinder body, with precision machined inner holes and outer surfaces subjected to hard anodizing treatment (anodizing+Teflon coating in special cases), has a longer service life and lower friction coefficient.

3. Integrated design, all double acting and single acting actuator models have the same cylinder block and end cap, making it easy to change the mode of action by adding or removing springs.

4. The combination pre loaded safety spring set can be conveniently and safely installed or the number of springs can be increased or decreased during assembly or on-site use.

5. Two separate adjustment screws on the external side are more precise and convenient for actuators already installed on the valve, adjusting the valve opening and closing positions. If full stroke adjustment is required, longer adjustment screws are also provided at the two end caps.

6. Multi functional position indicator, on-site visual indication, compliant with VID/VIE3845 and NAMUR standard slots, capable of installing and outputting all accessories such as limit switch boxes, electrical locators, position sensors (Beijiafu, Turck).

7. The air source interface complies with NRMAR standards and can be directly installed with NUMAR standard solenoid valves.

8. The composite material bearing shells and piston guide rings on the back of the rack, as well as the bearings on the output shaft, are designed to prevent metal to metal friction and increase lubrication, resulting in low friction and long lifespan.

9. All fasteners are made of stainless steel material, which is corrosion-resistant for a long time.

10. The connection part complies with the new international standard specifications ISO5211 and DIN3337 (F03-F25), making production and installation interchangeable and universal.