American pneumatic diaphragm pump

American pneumatic diaphragm pumpThe equipment adopts anti-corrosion air motor design, with a long service life. Double acting pumps ensure smooth fluid flow. The sturdy imported lubricant structure is extremely durable.Without dynamic sealing, maintenance is simple and leakage is avoided, and there are no dead spots during operation.Adequate energy utilization, when the outlet is closed, the pump automatically shuts down without any equipment movement, wear, overload, or heating.

Typical applications:

Medium pressure, medium low flow lubricating grease filling for automobile dealers, heavy-duty equipment dealers, fleet maintenance facilities

Quick lubrication and service center lubricant transport vehicle

Technical specifications:

Continuous working flow rate: 1.19lb/min

High fluid pressure: 8400psi (580bar)

Effective diameter of air motor: 3 inches (76.2cm)

Working pressure range: 30-140psi (3.0-9.7bar)

American pneumatic diaphragm pumpDetailed introduction:

1. Simple structure, sturdy and durable

2. A 3/4 inch interface pump

3. The end and middle interfaces of GRACO pneumatic diaphragm pump are 3/4 '

4. GRACO pneumatic diaphragm pump adopts the new Husky 1050 air valve, which is more reliable

5. Can be connected to an external solenoid valve for remote control operation

6. Strong self suction force, quick start-up

Performance advantages:

1. The pump will not overheat: compressed air is used as the power source, and during exhaust, it is a process of expansion and heat absorption. The temperature of the pneumatic pump decreases during operation, and no harmful gases are discharged.

2. No electric sparks will be generated: Pneumatic diaphragm pumps do not use electricity as power and are grounded to prevent electrostatic sparks.

3. It can be achieved through liquid containing particles: because it works in a volumetric manner and the inlet is a ball valve, it is not easily blocked.

4. The shear force on the material is extremely low: how it is sucked in and expelled during operation, so the agitation of the material is small, suitable for the transportation of unstable substances.

5. The flow rate can be adjusted by installing a throttle valve at the material outlet.

6. It has the function of self-priming.

7. It can run empty without any danger.

8. Can work underwater.

9. The fluids that can be transported are extremely diverse, ranging from low viscosity to high viscosity, from corrosive to viscous.

10. There is no complex control system, no cables, fuses, etc.

11. Small in size, lightweight, and easy to move.

12. No lubrication is required, so maintenance is simple and there will be no pollution to the working environment due to dripping.

13. The pump can always maintain high efficiency and will not decrease due to wear and tear.