Ammonia Escape Monitoring System Denitrification Process Ammonia Concentration CCEP Certification

NegotiableUpdate on 04/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ammonia escape monitoring system for denitrification process has CCEP certification for ammonia concentration. The ELAS-T series laser gas analyzer adopts an integrated in-situ extraction measurement method, which integrates the high-temperature sampling probe and high-temperature detection tank. The high-temperature detection cell adopts the Heriot light cell structure to achieve high-precision gas detection. The sampling pipeline and gas sampling transmission process in traditional extraction systems have been eliminated and directly installed on the flue, reducing the loss of flue gas sampling.

Product Details

氨逃逸监测系统脱硝工艺氨气浓度CCEP认证

Ammonia Escape Monitoring System Denitrification Process Ammonia Concentration CCEP Certification

The eLAS-T series laser gas analyzer adopts an integrated in-situ extraction measurement method, which integrates the high-temperature sampling probe and high-temperature detection cell. The high-temperature detection cell adopts the Heriot light cell structure to achieve high-precision gas detection. The sampling pipeline and gas sampling transmission process in traditional extraction systems have been eliminated and directly installed on the flue, reducing the loss of flue gas sampling. The system has high integration, is not limited by installation points and operating conditions, and has high measurement sensitivity and resolution. Online calibration can be achieved to ensure high precision and reliability of gas monitoring. Multi point measurement of the measured gas can also be achieved according to customer requirements.

氨逃逸监测系统脱硝工艺氨气浓度CCEP认证

Ammonia Escape Monitoring System Denitrification Process Ammonia Concentration CCEP Certification

performance parameters
model	gas	Detection range	resolution	response time	drift
eLAS-100T	NH3	0-10mg/m3	0.01mg/m3	≤10s	≤1%FS 7d
eLAS-200T	HCL	0-100mg/m3	0.1mg/m3	≤10s	≤1%FS 7d
eLAS-300T	HF	0-5mg/m3	0.01mg/m3	≤10s	≤1%FS 7d

Functional Parameters
preheat	30min	digital output	RS232/485	analog output	4-20mA maximum load 750 Ω
power supply	AC100-240V 47-63Hz/1.5kVA		alarm function	Concentration over limit alarm, relay output alarm, laser temperature abnormalitycall the police

environmental parameters
Measure optical path length	5-10m	Sample gas temperature	≤800℃	Sample gas pressure	Atmospheric pressure ± 5kPa
sampling flow	2-3L/min	ambient temperature	-30-55℃	sampling method	In situ extraction
Blow off gas source	0.4-0.6MPa compressed air			Protection level	IP65
Probe box size	630(H)230(W)630(H)mm			weight	45kg