Anhui domestic sewage treatment complete equipment manufacturer

NegotiableUpdate on 04/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Complete sets of domestic sewage treatment equipment in stock from manufacturers: buried below the surface, the surface above the equipment can be used for greening or other purposes, without the need for building houses, heating, or insulation.

Product Details

Domestic sewage treatment complete equipment manufacturer in stockIt is an integrated organic wastewater treatment device designed based on the operation experience of domestic and foreign domestic sewage treatment equipment, combined with its own scientific research achievements and engineering practice, using biological treatment technology. It integrates the removal of BOD5, COD, and NH3-N, has stable and reliable technical performance, good treatment effect, low investment, automated operation, easy maintenance and operation, does not occupy surface area, does not require building houses, does not require heating insurance policies, and other advantages. The integrated domestic sewage treatment equipment can be set up underground, and flowers and plants can be planted on the ground without affecting the surrounding environment.

On the basis of designing the process using the A-O method, the application of MBR membrane has been added to ensure the normal operation of the biochemical treatment reaction in the system; The treatment effect is stable and reliable, with a BOD removal rate of 98%. The effluent is clear and can be directly reused for flushing, greening, landscaping, etc. It can also be discharged to high standards, saving water and reducing emissions; The footprint is more than 50% smaller than that of ordinary process equipment, saving land; The equipment operates fully automatically, without the need for dedicated personnel or medication. It has low sludge production, easy maintenance, and saves operating costs;

Domestic sewage treatment complete equipment manufacturer in stock

The design mainly focuses on the treatment of domestic sewage and similar industrial organic sewage. The main treatment method is the contact oxidation method, which is currently a mature biochemical treatment technology. The water quality design parameters are also calculated according to the general domestic sewage water quality design. The inlet level is calculated as BOD5200mg/l, and the effluent BOD5 is calculated as 20mg/l. It consists of six parts: (1) primary sedimentation tank, (2) contact oxidation tank, (3) secondary sedimentation tank, (4) disinfection tank, disinfection device, (5) sludge tank, (6) fan room, and fan components.

1. Buried below the surface, the surface above the equipment can be used for greening or other purposes, without the need for building houses, heating, or insulation.

2. The secondary biological contact oxidation treatment process adopts push flow biological contact oxidation, which has a better treatment effect than mixed or two-stage series mixed biological contact oxidation tanks. And it has a smaller volume than activated sludge tanks, strong adaptability to water quality, good shock load resistance, stable effluent quality, and will not cause sludge expansion. A new type of elastic three-dimensional packing material is used in the pool, with a large specific surface area and easy biofilm formation and detachment by microorganisms. Under the same organic load conditions, it has a high removal rate of organic matter and can improve the solubility of oxygen in the air in water.

3. The biochemical tank adopts the biological contact oxidation method, which has a relatively low volume load of the filling material, and the microorganisms are in their own oxidation stage, resulting in low sludge production. It only takes more than three months (90 days) to discharge the sludge (using fecal trucks to suction or dehydrate into sludge cakes for external transportation).

4. The deodorization method of this buried domestic sewage treatment equipment not only uses conventional high-altitude exhaust, but also includes soil deodorization measures.

5. The entire equipment processing system is equipped with a fully automatic electrical control system and equipment fault alarm system, which operates safely and reliably. Generally, there is no need for dedicated personnel to manage it, and only timely maintenance and upkeep of the equipment is required.